Build Daily

Engineering Systems

August 12, 2017 18:08

Septic tank of concrete rings

click fraud protection

Positive characteristics septic

Positive characteristics of septic tank

Septic of concrete rings operate and install a lot cheaper than using a cesspool, as it has a lot of shortcomings, such as:

  • It needs to be cleaned on a much larger number of times, which is verymuch can beat the pocket.
  • Has ever a bad smell.
  • Release sewage is absorbed into the soil, and this is not good.
  • Well designed can not.

If such a system is designed to be, then it is said that for a long time, you can forget about any problems with this sewage.To select the correct location of the sump, you must:

  1. Installation shall, located at a distance of 5 meters from the house.
  2. distance from the well no more than 30 meters.
  3. settler establishment is projected on a small rise.
  4. drainage system should be, is designed at a certain angle.
  5. pipe itself is bound to be a straight line.

Positive characteristics of septic tank

basic rules of design settler

Septic of concrete rings has three containers.The water passes first pit decay processes in organic substances after cleaning in the second tank, water flows into the third well, after which the water is absorbed into the soil.The first location outside the well is prohibited.

After the collapse on organic matter, water flows into the second tank, which should be the presence of oxygen.The third container is considered to be the drain, which takes the purified water and gives it to the ground without causing any negative factors.The technological process should be so:

  1. In the beginning you need to buy a 9 concrete rings, as well as 3 of the hatch.
  2. Next on the priority dug three wells, the depth of which shall be 3 meters.

    Digging pits must be at least two people, as the first person should be engaged in the implementation of the excavation, and the second is to raise the soil to the surface.For example - it can be done by tying a rope to the bucket.

  3. substrate must be concrete.
  4. Occur sump installation work.With the help of a crane septic rings are mounted on each other.
  5. All cracks should be filled with liquid glass.
  6. gaps between the walls of the pit rings and showered the ground.

The basic rules of design of the settler

Also, do not forget about the installation of the sewer system, or rather laying the pipes, which occurs so:

  1. the first tank drain pipe should be, supplied with a bias.
  2. pipe that connects the first two wells should be less than 20 centimeters.
  3. pipeline connecting the second and third reservoir can is even lower at 20 cm.

The basic rules of design of the settler

main components when working

To install a septic tank made of concrete rings, you need to take care about the rent of freightmachines.Be sure to determine which side would be to call and how technology, in the same way when designing rings, be sure to check their structure, that there are no cracks.

To avoid damage to all live organisms, care should be taken that the water from the first two tanks are not leaking.It is the concrete base, ensures sealing wells and dirty water does not hit the ground.

basis of the third tank to be gravel or crushed stone filter.It so happens that the liquid from the third pit enters the water bodies and in such cases, a chlorine cartridge.Reservoirs have different volumes, it all depends on coming into it drains.

But it's worth noting that the septic tank of concrete rings has some negative qualities.To install it is necessary to allocate a large area, so it is necessary to track the quality of the sealing seam to avoid cracks or splits.

is worth noting that for the safety and longevity of service to their plants, some people cover the inside of the tank with bitumen or cement from the inside.This is not bad, and is considered as an extra measure of caution for its construction.

The main components of the performance of work

instagram viewer