Installation of heating in his house with his own hands

pipe fittings types used in the installation of individual heating

Besides the heating element, the absolute part of this type of system is based on tubulars.They can be of several types.Each type has certain properties and performance characteristics.So tubulars to mount and salons are of the following types:

• Metal pipes.This may be a pipe fittings made of cast iron, stainless steel or copper.This type of pipe for installation of heating communications features high reliability, thermal conductivity, resistance to mechanical stress and durability.Outs of these tubular products are: low resistance to corrosion processes, a high degree of occurrence of blockages.
• Pipes made of polymers.This pipe fitting may be made of polypropylene, polyvinyl chloride, polyvinyl chloride, cross-linked polyethylene.Pipes from polymers different from the metal in that their assembly process is simple, they are not subjected to corrosive processes, and have a high rate of resistance to clog.

Thus, from the above it appears that in order to carry out installation of heating your hands, use a large number of tubular products of different types that have specific properties.

As practice shows, the best device in the individual heating system show themselves polypropylene pipes.For installation of these products do not need to put a lot of effort.Connection between a pipe fittings of this type takes place by heating them and then fastening together using only one hand.Also, this type of tubulars has good performance under high temperatures.

Choosing the boiler for the heating system

main element of any home heating system is a boiler.This device generates heat, which then spreads through the system through pipe communications.All boilers have the same device.They consist of two chambers, in one of which the fuel burns, and the other - the coolant passes which is the starting point in the heat distribution system.Boilers are single-circuit and double-circuit.Single-circuit, this is the usual boiler and dual circuit - which is still going on production of hot water for the home vodoobespechitelnoy system.

Boilers come in several types.The most common - is a gas.Less commonly used electric boilers, but they are characterized by high cost of purchase and installation.It is also possible to use a boiler fuel which are liquid items such as gasoline or heating oil.The use of such devices is less dangerous and more environmentally friendly.

Choosing the boiler for home heating system is a factor, which is formed from a variety of indicators, which has used premises.

scheme of the individual heating Heating

their own hands, just like any other kind of installation work begins with the development of the proposed scheme of the system.Each accommodation unit, especially if it is a private home, has its own characteristics and requires a distinctive approach to the development plan of the heating system.Schemes by profiles should include the following elements:

• calculation of installation site of the selected type of heating boiler.
• Selection of heat storage elements (radiators) and the calculation of their place of installation.
• Select the type of piping elements and schematic calculation of their pads.
• Installing the expansion barrel.
• Selecting the type and quantity of fixtures.

Each of these elements can dramatically affect the performance of the heating system, so the design of all details should be approached carefully and verified.

Thus, the article described the basic starting points that describe and characterize a process such as installation of heating with their own hands.