How to make a simple filter for the pool with their hands - detailed instruction

idea of ​​everything on the site of an artificial pond attracts many.Especially now that a large range of different sizes of pools market.Many of the models - the frame type, which can be easily and quickly installed, and disassemble when required.It is only "boosts" Truckers do such a useful acquisition.

parallel question about cleaning water used.Many sites focuses on what little fun splashing in the pool, which contains suspended solids.To argue this does not make sense, I would like to observe that this is not important.In rare river or lake water is crystal clear, however, from this we do not feel any discomfort.The need to install the cleaning unit (filter) is evident, if we pay attention to such moments.

First , whether the pool cloth declared by the manufacturer serve a term if it is constantly in contact with the sand particles of dust or dirt?

Second , will be possible to meet their legal requirements (in the case of force majeure) for the exchange of goods, if the warranty on the quality of water used for swimming pools are not met?

Therefore, cleaning device is necessary.And now a little calculation of costs.The simplest frame pool is very modest size 8450 rubles cheaper not to buy.The most inexpensive filter industrial production is about 6300 rubles.

Comparable?It turns out that when planning a visit to the store, you need to focus on what is in fact because it is fun to splash in the country in its reservoir will have to "lay out" about 1.8 times greater than its real price.Only one conclusion - to make a filter for your pool of available materials, with their own hands.

enough options, so consider the specific design drawings and precise dimensions is hardly advisable.After the performance of the filter (and, consequently, its size) should be appropriate to the capacity of the reservoir cup.If you understand the meaning of this work, it is not difficult to figure out what you will need, where to put and how to join.Figure all well explained.

skillful master tips "in detail" absolutely not necessary.Such a man he will teach anyone.Therefore, let me express a few general considerations.

filter housing

probably better to use a tank made of plastic. First , it does not rust.Secondly , this material is easier to work.We'll have to cut holes for the pipes - this time.Plus - to connect with pipes and sealing joints.If working with metal, do not dispense with the welding machine.Each has it?And if a barrel of stainless steel (galvanized), so still need to know how to choose the right welding electrodes and produce.

Sales have plastic containers.Most, at 200 liters, which is bought for the holiday soul does not acquire meaning.A 40 liter barrel will cost about 400 - 420 rubles - is enough to filter and affordable.

pump

He will need, and here's why.Water on the plot, of course, comes in the pipe under pressure, regardless where the supply is made - from the central line or from an independent source.But the filter layer it "speed" dramatically reset.But to fill the pool will have a "height", through a side.So, in the area between it and the cleaning device is necessary to provide pressure.

Well, all the rest - a little pipe, a couple of fittings - even a dime.For river sand, of course, do not have to pay.

And now summarize: 400 (a barrel) + 700 (pump) = 1100 against the already mentioned (with the factory filter) 6300 (in rubles).Well, do it with your hands or not is up to you, dear reader.