As simple to calculate laminate room - tips and rules

As with any business, the repair must be taken seriously by planning ahead and buy all the things that are associated with it.One of the most important stages of repair is the laying of floors.Recently, many prefer true laminate.If you belong to this number of owners and decided during the upcoming home repairs to lay a floor, then before going to the store for purchase of necessary materials, properly Calculate their necessary quantity so as to laminate was enough and that youat the end of work left a lot of surplus.

How then calculate laminate?

This very simple procedure involves the following steps:

• Definition area of ​​the room.To do this, as we were taught in school, you need to multiply the length of the room in its width.If the room has a complicated shape (presence of recesses, columns, recesses, etc.), it is advisable to make the drawing and the total area determined based on the area of ​​the individual elements.
• to create a provision for cutting down to the result should add 7% when laying laminate will be perpendicular to the window, or 15%, if you no longer fits the diagonal laying.
• resulting from these calculations area divided by the number of square meters, which is listed on the packaging laminate.If the number would be a fraction, it shall be rounded upward.The resulting figure is ultimately determines the amount of packaging laminate, which must be purchased.

Note!

packaging laminate should always be carefully studied and clearly understood to cover a floor area it is designed.This is due to the fact that this figure varies from manufacturer to manufacturer.But even laminate the same manufacturer may have some modifications.So never say to yourself that this producer or the brand you know, so the label on the packaging should not be considered.To avoid possible miscalculations check the labels on all packages, that you intend to purchase.

Do not forget that you will definitely need a plinth to finish was produced in your work.The total amount of the required plinth should be determined on the basis of the entire perimeter of the room, adding to the number of 7% in the dockage.In order to avoid unnecessary expenses, or problems related to the lack of material, all payments must be made very carefully.If in doubt, do not be lazy to do them again.