Where to begin repairs in the kitchen with his hands - procedure and tips

We will not burden the reader with a description of all the charms of a new kitchen and invite us to dream together, for example, how wonderful to bake pies, standing in a brand new ... and later in the same spirit.Such "fantasies" on the Internet is enough.This article is intended for a person inexperienced in the "maintenance" activities, so we can see our task is to give him a reliable reference - what, how and in what sequence to do and where to start to repair your kitchen.We believe should pay attention to a number of nuances that are often simply overlooked.

We will try to present all as detailed as possible, and that one in particular is useful, the reader will understand itself.To the advisability of individual events become clear, let us recall the specifics of the premises - fluctuations in humidity and temperature (as well as their high values), fumes, smoke and use in the process of substances that are difficult to remove from surfaces (for example, oils, fats, etc.).In addition, and quite high "permeability", as in the kitchen we go even more often than in other rooms (this is the question of choice of flooring).So, we form the sequence of actions:

Defining the scope of work

truism, but it is from this and any work begins.What you need to define?

«Technical condition 'premises

That is why you need not only to clarify how a kitchen should be transformed.It needs to be thoroughly investigated.See everything - the ceiling, walls, floors, and not just "look around" and ripped off all the old finish.For what?

First , find out if struck some parts of mold, fungus?Most of the error committed by those who miss this point, because there is no, even the most advertised lining will not last long - all this after some time and reflect on new material.By the way, it could be helpful information on how to get rid of the mold.

Second , whether there is a crack, a crack, diverged joints are the places where plaster is barely holding up?From this it depends largely on the microclimate in a room and, consequently, the service life and household appliances, and trim itself.

Third , determine not visited by there from time to time in the kitchen "uninvited guests" - a mouse?

Fourth , evaluate the quality of ventilation.The first sign that it does not meet the conditions of operation - stains on the ceiling (soot, grease, dust clumps).You should also measure the size of all ventotversty.They advisable to install protective nets.This will reduce the likelihood of penetration into the kitchen large insects and rodents.

Fifth , the state of the window frames and openings, especially sections of the wall under the window sill.

Sixth , heating quality.It is possible that there is a desire to change the radiators or "reconstruct".For example, if they are old, cast iron, the air bleeding cock of the line breaks frequently or not valid, or absent.The problem needs to be solved immediately, and not wait for "roasted rooster."

Seventh , the state sanitary ware, especially pipes.Are there any leaks in inaccessible places to review how the valves?

Naturally, have all the furniture and appliances to push the walls in order to have free access to them.

desired layout and equipment

Perhaps the owners want to change at the same time completely or partially the situation, change the location of objects, something to establish separately.So, inevitably works such as "resurfacing" e / wiring, possibly pipes.

Drawing room plan

This can be a simple "drawing" by hand, but it is necessary to reflect all the features of the configuration space - projections, recesses, corners, corners.Useful information about the options to be planning a small kitchen.And all should be put down dimensions, including, and in height (for example, from the floor to the sill).How important is it?

First , such a plan will more accurately determine the arrangement of furniture (appliances) and to the volume of materials procurement.

Second , not overlooked various nuances.For example, it was decided to replace the water pipes in the "metal and plastic."How will the track in a new way, as will the entire length of its twists?The required amount of fittings (connectors) is determined according to the drawing.Examples enough.The same applies to e-mail / posting - how many outlets, some (single or, for example, double).Where it is more convenient (and how) to install switches (surface-mounted or secretive), new lighting (additional "highlight").

Third , many finishing (facing) materials are sold in rolls or meters, and length - standard.Is it better to take - 3 panels with 2 m or 2 - 3 m?Seller will not understand if he is to explain, as needed "on the fingers".But before seeing a drawing, it will help all to choose the right.This greatly minimizes the amount of waste and reduce the overall cost of the repair.If you purchased a new technique, the plan will allow the purchase model of optimal size.

Determination of the necessary materials and amounts thereof

Inspection made, all the defects identified, a plan taking into account all the wishes of the mistress is.It remains only to draw up a detailed list of everything you will need - glue, putty, primer, panels, wallpaper, wires and so on.Plus - the necessary tools and accessories.

Practical advice

• Do not immediately engage in procurement.It is necessary to "surf" the Internet, examine relevant information on finishing and additional materials.
• before performing maintenance to determine how much it will have to spend time, and based on this plan work.For example, in the evenings and at weekends, on vacation, during the winter holidays.
• must take into account such factors as the material compatibility and the specificity of their application.What for?For example, not every soil or paint suitable for concrete base.Some adhesives may be used in a wide range of temperatures, while others - no.

Home Repair

Room preparation

• It should be completely freed from all subjects.
• All surfaces are cleaned to the base.This will allow even those defects that could not be found during the initial inspection to see.
• Sealing all cracks and crevices.It is through them is lost, and the heat gets cold.

Substrate preparation

list of events depends on the finishing material and methods of deposition (fixing).But all surfaces necessarily have to be processed antiseptics.If any portion struck by a fungus, it must be carefully handled.

Next is the leveling of the surface, the additional impregnation and priming.

next stage - the most "dirty" work.These include the replacement of window and door frames, pipes, radiators, valves, exhaust assembly, electrical and so on.And only after that you can begin to furnish the room, which begins, of course, from the top - from the ceiling.While all this is relatively few.For example, when mounted equipment in the kitchen?The answer is simple - how convenient.The main thing is not to damage neither she nor the finishing material.In short, the repair requires creativity, and the basic nuances we noted.What

consider

• Access to shut-off valves must be unobstructed.
• correctly identified with a cross section in accordance with the total load capacity.
• grates on ventotverstiya need to install metal only.Plastic is easily destroyed by rodents.
• Places pipe penetrations through walls need to seal tightly.Foam or mineral wool mice did not stop.