Dressing table bedroom with their own hands

elegant dressing table in the bedroom - the necessary and practical furniture item.Make an original and authentic table for the essential needs of women, it is not as difficult as it may seem.

dressing table in the bedroom should be in harmony in style and color with other furniture and interior design.In order to become truly functional and useful objects made dressing table with mirror.

tools and materials to work

1. Drill, screwdriver and better with a cartridge of 10 mm and a set of bits for assembling furniture and drills.
2. Jigsaw with blade for chipboard.Many stores have a paid service chipboard cutting.
3. Combined Reversible screwdriver with set of bits, hex key to SCREW.
4. marker and an awl for marking, measuring tape, ruler and carpenter's area.
5. iron or hair dryer building, for welding the flat end face of the tape.Silicone adhesive for "U" - shaped profile and very flexible profile.

fittings and fasteners for assembly dresser

1. in furniture stores have a large selection of handles for drawers and front doors.
2. loop will be needed, awnings and roller guides for drawers.
3. To build raskroennyh elements of chipboard dresser buy SCREW (5h70), screws for wood (4x25 and 4x16).
4. Plastic attachment or special glue for fixing mirrors, metal corners, PVA glue, plastic decorative caps for konfirmat a primary color chipboard.

drawing and markup dressing table with mirror

1. Choose Your dresser.It may be one or two pedestal.In one nightstand drawers can be mounted, and the second to make shelves and front door.An important detail is the capacity of the dressing table.There are many options and designs for the dressing table, which is a photo posted on the Internet.
2. Start with drawing - scheme.Identify a place where there will be a dressing table and approximate dimensions.Plan design of the table, starting from the best countertop dimensions.Table tops can be purchased in stores or make your own.Facades for doors and drawers so you can buy or cut it out of chipboard.
3. If you decide that the mirror is fixed integrally on the dresser, then to the back wall using chipboard and it becomes solid, as shown in the drawing.In other embodiments, the mirror can be mounted separately on a wall.

marking holes SCREW

1. By the flat side of the part is applied carpenter corner.Pencil or marker pin is placed in the place of drilling.Awl nakernivaetsya point for the drill.Then conducted a fine line perpendicular to the edge and vertically on end.The blank is turned to the back side and by means of brackets, is a notch on the opposite side.
2. on the front side of the marking is done easier.Are made perpendicular to the edge of the pencil serifs.It measures the center plane and awl made PUNCHING.
3. Otversriya under the SCREW made drill diameter of 5 mm.Chamfer (countersink) removed a drill diameter of 8 mm to a depth of no more than 2 mm.In the end face side of the workpiece hole is drilled to a depth of no more than 40 mm.

Pattern and assembling dresser

1. Independently saw out parts for assembly can jigsaw, but require high precision, clarity and cut compliance shape cutting.Self-cut end surfaces, then decorated with "P" - shaped piping or flat ribbon trim.
2. texture and thickness of laminated chipboard, you pick yourself.The standard thickness of 1.6 cm, is consistent with the technical requirements for the manufacture of furniture, dressing table is no exception.Prepared parts to build a dressing table with his hands, handled the end faces with sandpaper.Inevitable in such situations chipped laminate flooring, then decorated with a face edge.
3. main frame dresser folded mating surfaces, the center of the holes and SCREW baits.Allen key №6, SCREW tightened to the disappearance of gaps between the mating surfaces and to the steady-state design of the carcass dressing table.
4. For longer lasting attachment in an area interfacing sides and horizontally mounted side-bar and a few metal parts.

assembly of drawers and hanging doors facade

1. Side plank boxes nasverlivayutsya in a plane under the SCREW, and the front and rear walls in the end.By the bottom of the bottom is nailed plywood or fiberboard small nails and screws fixed increments of 5 -. 7 cm
2. the side of the self-tapping screws are screwed trays, half roller guides.The same procedure is performed on the inner sides of the side walls of cabinets.The guide is divided into right-handed and left-handed.It is important not to confuse them.
3. to install overhead loops, in the manufacture of the dressing table with your hands, you will need a special drill Forstner, 35 mm in diameter.Loop Hole drilled to a depth of 12.5 mm.It is important not to drill through the surface.The cups are inserted overhead loop and fasten with screws.
4. doors on the facades of cabinets and drawers drilled holes for handles.This will require a drill of 5 or 5.5 mm.Furniture handles installed and clamped with a screwdriver.
5. mirror is attached by means of special plastic fasteners or glue.Who appeared in DIY stores a special double-sided tape for mirrors.Before final installation, make a careful marking the mirror to the mounting plane of the dressing table.