Decorative arched corners : especially the installation

newest building materials and modern technology accompanied by the creation of not only stylish and incredibly beautiful interior, but also simplify the process of finishing.Each method of registration and finishing the interior is original, has its own nuances and apply depending on certain features of the room or pans author.

One of the most important at the moment is the way of interior decoration of the arches.This type of decoration is able to give the design of uniqueness and originality.With interior design excellent job openings arched decorative plastic corners, carrying both practical function and aesthetic.Before making openings is necessary to understand what are the arched corners, as there is mounting over the arch and how to glue the corner of the arch.

Why arched corners

Benefits arched corners are undeniable, therefore, selecting this type of finish will receive a host of advantages.Decorative arched corners are impressive lifetime - up to a few decades.However, they do not require painting and are easy to clean.Price arched corners is acceptable and accessible to everyone, and the choice is simply amazing variety of colors and shades.Except that fine arched corners mounted on any type of surface, they also secrete irregularities, gaps or other error angles.Still, their main function - to select the ornate curves unique design ideas.

Types arched over

arched decorative corners - is an optional design element armholes, but using them is easy to give the interior a finished look.To make the arches will not approach each decorative detail, as each arch has its own configuration and corners - a certain size, and they are created to design structures with uneven lines.

Decorative corners and plastering

no secret that the faces of the arches are subject to aging and subsequent destruction.Raw arch eventually wear out and fall off.To prevent this undesirable process, the edge of the arches are framed with special corners, the purpose of which is to protect the edges of the arch strain, crumbling putty and abrasion.On a functional purpose arches are: decorative and plaster.The latter are the basis on which the plaster is applied.

In turn, arched decorative corners are mainly aesthetic function.Furthermore, this decoration element also hides the irregularities and inaccuracies light openings.Decorative arched area is presented in a large assortment in the stores: a huge selection of colors and materials.

Plastic corners

In order to enhance the edges of the opening plastic arched corners are used most often in the wall.They are made of PVC with the addition of special substances that affect the flexibility and strength of the corner.For high-quality finishing materials PVC sheet is bent by hot bending angle of 90 degrees.Due to its chemical composition profile takes the desired shape, it is more durable and eliminates damage to the structure.

most common arch area of ​​PVC is considered white.White corners of the plastics are very demand due to its flexibility and low cost.However, the corners are available in other colors.

advantages of decorative parts made of PVC:

1. easy to clean as a normal warm water, and with the use of cleaning agents.
2. Corners PVC is very easy to install using a sealant, glue or nails.
3. The low price allows you to use plastic corners for decorative purposes as well as for decoration.
4. Plastic arched corners are excellent protection from the doorways of potholes, abrasion and destruction.
5. long service life for over 50 years.
6. Variability decorative finish arched openings due to the variety of colors and sizes.

Tools and materials for the installation of arch corner:

• decorative arched corners,
• glue for PVC materials,
• screws or nails,
• rubber mallet,
• liquid nails,
• putty,
• primer,
• sealant,
• spatula.

Mounting of arch corner

of decorative arched corners requires prior installation.

1. Calculating the number of the profile.Decorative arched corners are sold in the form of bars 3-7 meters.It is recommended to buy the corners just a few centimeters long, to insure against errors in the calculations.
2. Cutting angle brackets done gradually.No need to rush to finish slicing the material directly to both sides armholes, because there is a risk to spend the excess material.
3. Determination of stickers for arched corners.For example, to glue a decorative plastic arched corner smoothly and nicely better to choose sanitary silicone sealant - it just will not act on the wallpaper.Since wet sealant, it will not be difficult to remove it from any surface.
4. Fit brackets.For cutting angle bars using a special paint knife or hacksaw.
5. docking.When decorating the side and upper corners on the opening often necessary connections at 45 or 90 degrees.For precise cutting advance is prepared miter box.

Surface Preparation for the installation of arch over

1. Before gluing decorative corners, you need to clean the surface of dirt, old wallpaper, putty and loose materials.
2. If the base fat, it should be treated with solvent or degreaser.
3. profile is glued only to the prepared wall, ie,require pre-coat and primer surface.Once dry building mixes (putty and primers) can proceed to substantive work - glue arched corners.

Installing Arch corner

installation process is surprisingly simple arched corner.There are several ways:

• paste arch area;
• secure corner screws;
• impaled with nails without hats.

How stick arched corner

to arch served for any one year, it must be strengthened.Learn how to stick Arch Area, service life and safety of the arch will increase significantly.Typically, decorative corners are attached to the liquid nails or glue.Nails is better to buy in a special tube under the gun.This will cause the adhesive composition quickly and easily.Before you buy glue should pay attention to its color.The colorless adhesive is suitable for non-ferrous parts, and white glue - for parts of the same color.

So, adhesive is applied thinly and evenly distributed along the profile.Further, the decorative area is applied to the opening.For a more uniform distribution of the adhesive area can be a little push.Then for a while area must be removed from the surface and wait a little time.Then the arch area again firmly pressed and additionally fixed with duct tape or masking tape.

How to fix the corner screws

arched decorative corners can be screwed through the holes.In order to profile it fits close to the arc de Triomphe, the frequency is determined by the mounting screws.However, this method of attaching the arched corners have their drawbacks.If lashing little drag, the profile will bend.And the moment of tightening screws may cause cracks on the surface angle.It is necessary to consider the fact that the fasteners will be seen, therefore, of little aesthetic remains.

Mounting corners with nails without hats

Installing Arch corner is often done on the nails without hats, which hammered at the arch perimeter.

Hint: nails without hats clogged so that their serving portion was smaller than the thickness of the corner.

Additional material on "how to glue the arch area," presented in the video.

beautifully decorated arched doorway allows to move away from traditional solutions in design and architecture, often applicable in a typical building.Arch is not only decorate the doorway, but also serve as a visual separator space.

Flexibility, variability of the products, a variety of colors will create a unique finish, which brings the interior a special attraction, unusual shapes, asymmetry.After reviewing the information on how to paste the arched corner of the arch can safely start to finish, and creating an atmosphere of grandeur and nobility, which carry the arch for a long time.