As the sheathing tube in the toilet

Preparatory work before lining pipes in the toilet

Before masking lining of pipes in the bathroom, it is recommended to prepare the space and communications, making it easier to camouflage and help the construction will last longer.

first thing recommended to do - is to test the strength of communication, or even possible to replace them with new ones.It is best to replace a metal water pipe - a plastic, as its service life is much longer and it is easier to install.If there is a breakage of pipes, you have to destroy the masking structure, which spent so much time and energy, as another way to get the gap will not be.It is recommended to set the transition elements, made of the same material as the tube.You should also check all connections for leaks to prevent further leakage.There are special materials with which to carry out their extra insulation - sealants, special plastic tape.

Before hide communications, you need to draw a detailed plan for themselves their location.This is required for the correct calculation of materials and manufacturing special hatches (through such holes can get to the water supply channel without difficulty).

Do not skimp on the quality of the pipes, since the leakage or damage at their replacement and replacement of hiding structures will much more expensive.

How to use blinds and roller blinds to hide the pipe in the toilet

The easiest and cheapest way of masking water attribute is mounting in the toilet roller blinds or shutters.They occupy a small area and is therefore suitable for the smallest space.The main advantage of this method of masking is an easy and fast access to all the communications room, you just pick up the shutters.Set this design can be from the floor to the ceiling, concealing every centimeter of the aqueduct, and access to it will ensure control of its state and in case of failure can be replaced or repaired item easily.

blinds Large selection of colors will make the room look beautiful and harmonious.Installation of such a structure is quite simple.The box is mounted under the ceiling of the room itself, so it will not interfere.

Note!Roller shutters as a way to disguise the aqueduct are reliable and durable in use, and the space underneath can be filled shelves, which will serve for storage of various household items.

This method of masking is used not so often with respect to the other, as the design of roller blinds or shutters badly combined with ceramic tiles, which are mainly similar to trim room, but if you pick the right colors is the appearance of the room will look organically.

Mounting roller blinds in the bathroom

will need to install the roller blinds:

• level;
• roulette;
• drill;
• kit for roller blinds;
• fasteners.

From that, any sizes purchased shutters depends on the place of its fastening.If you want to shut down the entire wall from floor to ceiling, it requires a large roll, made, or adapted to the size of the wall.In most cases it is enough to buy narrow and long blinds to conceal the niche or almost square, where access to communications is assumed through a "window".Walls must be completely smooth, so before installation is recommended to align their putty or plaster, if necessary.

now proceed to the installation of roller blinds.

1. They are fixed on the structure, made of metal profiles.
2. Next set box, then on the drum shaft attached slats, which must be placed in the grooves.
3. After installing roller blinds they need to be checked for serviceability.To do this, they should try to close and open - well-established shutters open easily and smoothly.

If the work is done in good faith, and the blinds are installed properly, then this design will last a very long time.

As sheathing tube in the toilet on their own with the help of drywall

To hide the plumbing in the bathroom, there is a special type of drywall - water-resistant, designed for bathrooms.made false walls made of plasterboard, it is mainly used as a base under the tile, washable wallpaper or plastic.The main advantage of such a masking structure - it is easy to dismantle at any breakage or leakage.

Raised wall made of three kinds:

• oblique;
• square box;
• multi-level box.

Installation false wall to hide communications

before purchasing material for the manufacture of false wall is necessary to make calculations to determine the right amount of plasterboard and other materials.Calculations must be precise and include all projections of future construction.

Once payment is made, and all the necessary materials purchased, we start to work.You will need:

• roulette;
• level;
• screwdrivers;
• drill;
• profile for the frame, preferably steel and galvanized;
• awnings;
• drywall.

How do false wall: step by step instructions.

1. frame for plasterboard is installed from metal profile.For easy access to the meters do hatches, doors that open easily, so it is necessary to place tents on the frame.
2. Before you begin, you need to figure out what size sheets of drywall required, and immediately prepare their desired length and width.To do this, you need to draw up a detailed plan for installation and mark each item there.
3. Fasten sheets of drywall press washers, work begins on the floor.Joints that are obtained during assembly, should be pasted with paper tape and putty.The surface design process finishing putty.
4. After plasterboard false wall is ready, you can start to glue on it tile or wallpaper, to give structure, masking water communications, a more attractive appearance.

to have a better idea of ​​the work on the production of false walls of drywall, it is recommended to watch the video lesson.

Shtrobirovanie, as a way of laying pipes hidden

Shtrobirovanie - is work on making small depressions in the wall of the room where pipes or other utilities.This is a great option masking water and sewage in the bathroom or toilet, the area of ​​which does not allow for additional facilities.

Shtrobirovanie under water is, as a rule, on the bearing walls, which can lead to a weakening of the building structure.Therefore, before carrying out such work, it is necessary to consider some nuances:

• magnitude recesses under the pipe must not exceed 15% of the thickness of the wall;
• The diameter of water should not exceed 50 millimeters.

Shtrobirovanie a pipe in the toilet

Shtroblenie walls is a difficult process, it is relevant in the event that the room is planned major repairs or alterations.Follow the steps below to perform such work will not be difficult.

Step 1. Apply the pencil markings on the wall, where he will stay in water.

Step 2. Use wall chaser grinder or two grooves are cut, they must be placed parallel to each other.

Step 3. The gap between the grooved knock a chisel or punch.

When the recess for the communication is ready, it should be cleaned of dust and fine dust with a vacuum cleaner and a well-primed.Now there can be placed tube.

Note!This method does not involve access to utilities, so very carefully check their serviceability at each site.

After all the attributes of sewer installed, you need to seal the recess stucco, plaster or putty.

Masking pipes in the toilet in the form of economic locker

a method such as masking of pipes with an ordinary economic cabinet, suit is not for everyone, but only for those who have a large enough space.This method is the simplest of all the above-indicated but no less comfortable.Cabinet will provide quick and easy access to all communications and can be useful for storing various accessories.

Installation of domestic locker to conceal pipes

1. To install this locker, first of all, needs to be done on a wall or walls of a frame made of wooden bars.
2. After that you need to attach to the frame of the loop and put on their doors, facades, which will serve as a masking structure.

Note!Recommended lacquered doors, paint, or just buy them from the water-repellent material, so that they could serve more time, without losing its attractive appearance.

1. placed below the locker screen for water, its blade must fit tightly against the walls of the toilet, and it is necessary that there were openings for water to a tank fittings toilet.This screen should be easily inserted and just as easily removable.Alternatively, it may be made of plywood or plastic.

Note!To masking structure looked harmoniously, and the screen door of the cabinet is recommended to be made of the same material.