How to glue wallpaper meter - master the simple principle of operation

How to calculate the number of wallpaper?

Before pokleit meter wallpaper, you need to calculate their number (how many rolls you will need in the room).Because to start determining the perimeter.For example, the width of the room is equal to 6 meters and a length equal to the perimeter 7. Then 26 m Calculation of wallpaper by the following formula:. Perimeter premises: roll width: 9 or 10 (the first number if it is fit for the image).

explain that means 9 and 10. The fact that the data have a length of wallpaper is usually 25 meters.The average ceiling height is 2.50 m. Therefore, from a roll turns 10 paintings.Returning to our example, the number will be as follows: 26: 1: 10 (without fitting the pattern) = 2.6 rolls.Rounded to 3. As can be seen from the above, these wallpapers are still very profitable option.In that case, if it turns out that the roll length is 10 m, it is necessary to divide by 3 and 4 respectively.

Benefits meter wallpaper

As it turned out, meter wallpaper have some advantages over conventional.Firstly, we can say that sticking

much more advantageous in terms of time and finance costs.Three data wallpaper roll cost less than conventional 6 rolls (0.53 m).But the process is much faster and significantly saves consumables.

Secondly, they look more attractive, since the wall is fewer seams.It generally affects the perception of space.In addition, the stitch pattern is less necessary.Thus, random irregularities when combining images will not be as evident.Third, often have a width of 1 meter nonwoven wallpaper that are even and durable.

How to glue wallpaper meter?

Often the question arises - a meter stick wallpaper? Initially, you need to prepare the ground.To do this, he removed the old coating, whether plaster, paint, etc.Then the walls are aligned.At the same switches and sockets are closed special masking tape.Next, prepare all the related tools: tape measure, pencil, water level, plastic trowel, bucket of glue, polyethylene, a knife.

After this the meter sticky wallpaper.Make room layout from the corner.Apply a wallpaper and note the level and vertical pencil line.It is important to do the layout, taking into account the fact that the fabric will be glued by overlapping.Next, the film is spread on the floor or on a table.We need it to the front side of the web is not soiled.The adhesive prepared in accordance with instructions (written on the packaging).

Attention!The selection of adhesive should be implemented depending on what it is applied to wallpaper.For the paper, non-woven, bamboo and tissue need some adhesive mixture.

Then the question may arise - a meter stick wallpaper on the walls?The principle is the same as conventional.Cut fabric length equal to the height of the ceilings, plus 10 centimeters.Lay them face down on the polyethylene and glue is applied to the underside.In the center make a bend and fold fabric in half so that it properly soaked with glue.

Roller applied the same structure on the wall.At the final stage, attach themselves fabric and smooth them with your hands or with a dry cloth (to avoid blisters).To avoid confusion with the way meter to glue wallpaper, video description that is presented on our website, just follow the instructions, and then the process will be successful!