Adhesive non-woven wallpaper - a way of preparation , structure and properties

Benefits glue

Any wallpaper glue for non-woven wallpaper contains special ingredients that prevent the formation of an environment conducive to the appearance of mold and mildew.This is a significant advantage in selecting staff for rooms with high humidity (which usually develops a fungus).In addition, it also has other advantages, which will describe below.

• does not as part of any impurities or harmful to human health components.
• Easy to use.Just 10 minutes a ready solution for future use.
• has excellent adhesive properties and is easy to apply.
• Practical and economical, comes out to about 10 kg of the finished adhesive of the 800 grams of the dry mixture.
• When breeding lumps are not formed, and the substrate does not stain.
• not enter into any reaction with the colors that are used for further staining of wallpaper.
• mixture in a ready state can be stored in a sealed container for 10 days.

process for the preparation and consumption of a mixture

package contents are poured into an enamel bowl and dilute with cold water.In the process it is important to continuously stir the mixture until a thick binder and weight.Then you must wait for another 5-10 minutes, until the adhesive swells and continue stirring.If it is necessary to make the composition more fluid, then add water (approximately 150 grams per 1 liter of the prepared composition).Next Wallpapering is carried on the wall.It is believed that the best glue for non-woven wallpaper - brand KLEO, Metylan, Quelyd and some others.

Consumption of glue for non-woven wallpaper depends on the type and structure of the webs.As already mentioned, from 800 grams of preparing about 10 kg of adhesive.This composition will be enough to pokleit 66 m2 non-woven, 16 rolls of vinyl, glass cloth of 50 m2, 75 m2 structured wallpaper.Also are important tools that made the walls of wallpaper pasting.For example, the use of a roller or brush increases the expense and the use of the device oboynosmazochnogo conversely decreases.

Substrate preparation and method of applying wallpaper

surface before applying should be smooth, flat and clean.It should be free of cracks, bitumen and grease.That is why it is first cleaned and then primed and shpatljujut.Once the base is ready, glue is applied a special brush or roller.Note that the layer width should be greater than the thickness of wallpaper.The projections on the ceiling and corners is particularly important to carefully apply makeup.

Pasting of walls with wallpaper made without first cutting the rolls.The first web should be applied from the window or corner of the room, retreating 40 centimeters.Paste it on top of the wall vertically.Then smooth the cloth, pressing with a spatula or a brush in the direction from the center to the edges.This aligns the surface, smooths wrinkles, eliminates air bubbles.If there is excess glue on the edges, they are wiped with a damp cloth or sponge.

cut off the canvas down at the baseboards special knife.The second leaf is applied by "butt" to the previous.The holes for switches and sockets do not need cut in advance.Only when the coating dries, cut them with a knife.For important battery paste over the wall to a depth of approximately 10-20 centimeters.And the rest of the space is painted with paint the color of the wallpaper.If you intend to continue painting the whole surface, it is done in 2 hours after pasting.