What you need to know to set the screen

What you need to know to install

screen Choosing this item, it is necessary to take into account the material from which it is made.It is desirable that the material was in tune with the rest of the ensemble of your bathroom.lungs most commonly used in the manufacture of plastic and is very popular screens.They are durable, not afraid of moisture, well decorated, can be produced in different colors.

Some prefer cheap MDF panels, but let us say at once, they are short-lived and very afraid of moisture.Therefore, if we decided to set the screen made of MDF, then treat the material with a special protective structure.In that case, if the owner does not plan for the future in the bathroom to store anything you can sew tight space with plasterboard and to provide the screen door for access to communications.
Next you need to take care of the frame, on which are mounted panels.It can be made of aluminum profile.Before you begin, make a layout of floors and walls to display properly seated over the bath.The entire framework can be strengthened by additional cross bars.Profile fastened to the floor and walls, and all the parts are joined together.

The main types of screens and setting their own hands

screen from the plastic lining.The cheapest option, which is easy to install and it is not difficult to dismantle if necessary.To install the lining we need:

• framework that we have already prepared for you on the perimeter of the screen.Getting stick starter profile to the floor sealant.
• then strip lining inserted into the starting profile.Do not forget about the opening for the door.

Plating baths of plasterboard.Applicable special waterproof drywall.The great advantage of this material is that it can be to build a niche with shelves for the bathroom.To install it, we will need all of the same frame, to which we attach the drywall sheets.In addition, we will need:

• paint;
• impregnation;
• sealant;
• putty;
• profile for drywall.

First mark up the frame, we collect it, set it under the bathtub.Then fasten the frame to the drywall sheets and when it will take its rightful place, it must be processed sealant coat primer, putty.Field of all the construction before the end of dry can be taken for finishing work.
bath screens of tiles can be done on the basis of brick, plasterboard or MDF.To begin the surface is primed, puttied.Once everything has dried, the layer will be overwritten by sandpaper and primed again.Tile placed in a similar manner as the wall.Tile is always advantageous to look, especially if you choose the original color scheme.Using tiles can even make a sliding screen, but it will be difficult to implement.
Use MDF can only be pre-soaking them with special impregnation, since this material is afraid of water.Thereafter gruntuem and fastened to the frame is similar to drywall construction.This screen should be additionally protected against moisture by means of the ventilation holes in the opposite side of the screen door technology, as was done in the photo below.As a rule, enough to cut a slot 5-10 cm long and 2-3 cm in height. For camouflage camouflage its decorative grille.Decorate MDF screen can be at their discretion tiles or plastic.