How to unscrew the bulb socket

What you need to replace the bulb socket

In order to begin work on removing the cap of the bulb holder, it is necessary to prepare a number of tools and materials:

• pliers.
• Scissors.
• Cutters.
• a plastic bag.
• gloves.

How to unscrew the cap from the cartridge:

Action Plan Work on removing the cap from a cartridge bulb consists of several turn-based events:

• adoption of precautionary measures.
• Removing light bulbs shell.
• Untwisting cap bulbs with scissors.
• cartridge into pieces.
• Untwisting with pliers.
• Extraction using a plastic bottle.
• extraction by breaking the cap.

What if no light gets out

Step 1: precautions when replacing the light bulb socket

This step is very important, because the work is carried out in contact with high voltage.Therefore, first of all, you need to turn off the electricity in the apartment.This can be done by unscrewing caps or using a special switch.Carrying out the work is carried out in rubber gloves.Tools should be used with wooden handles or wrapped with insulating tape.Bare wires is checked using the indicator.

Step 2: how to avoid injury during

light bulb replacement If the light that burned, do not remove, it can be split.To this end, the glass membrane must first be put on the package.Then hit the glass shell with a hammer.Thus, all the pieces will remain in the package and will not cause injury in the future.

Step 3: loosening the cap bulbs using

scissors To do this, insert the scissors into the base and push so that they rest against the inner surface of the cap.Then you need to rotate the scissors counterclockwise, thereby unscrewing the cap from the cartridge.

Step 4: Divide the bulb holder on the part

Most cartridges can spin in two parts.After separation of the top part of the cartridge, there will be a lot easier to unscrew the remainder of the cap.

Step 5: How to unscrew the cap with pliers

Glass column of light bulb with a cloth wrap.Then you need to wear gloves, firmly to take a pair of pliers for a glass column and twist the cap counterclockwise.

Step 6: PET bottle for safe unscrewing the cap bulbs

s neck until the first signs of melting.The molten end must be firmly inserted into the socket and wait 20 seconds to pour plastic.

Step 7: How could not unscrew the cap on pieces

If the previous methods to remove the cap from the cartridge, you should try to break it.For this purpose it is necessary to capture a nipper and rotated thereby coiling them.Cap should gradually withdraw from the cartridge.

Thus, the article described and characterized ways to remove the cap from a cartridge bulb.