Let us examine how the adhesive glue ceiling moldings

polymer compositions or liquid nails?

One way to strengthen the ceiling moldings is to use a polymer blend.The most common brand - it «Titan» and «Moment» , which have excellent astringent foundation, quickly dry up, and firmly hold the attached materials.In addition to these brands, there are many others that differ only by the manufacturer and price.Polymer-based formulations are applied using a solvent, which maintains its liquid state.

deciding what glue to glue ceiling moldings, you can stop on a variant of liquid nails.This composition is perfectly holds almost any material, so from what would not be a component of your ceiling moldings, liquid nails fix it securely in place.There are two types of liquid nails: neopropilenovye and acrylic nails.The first variant is made from an organic solvent, it has a pungent odor and is not safe for humans until completely dry.However, it can be used in rooms with high humidity, it is not available for liquid acrylic nails.

Note!Acrylic liquid nails do not have a sharp odor and in the process of drying it does not emit harmful substances to humans.

How glue to glue the ceiling moldings, in addition to not dub the wall?

have sales consultants in DIY stores often ask, what better to glue the ceiling moldings.And part of the recommendation is to use a special putty.In contrast to the polymer composition, the plinth will not have long to go, so he grabbed applying putty.An important factor acting on his behalf, is the ability to use the composition in enclosed spaces, without the need for ventilation.In addition, the wall should not be perfectly flat, attach to the baseboard.Unevenness in the wall can be solved the same mixture.

important factor is that attached to a base material will be kept safely and for a long time.Apply this coat is very simple, using a spatula.It is spread evenly over the surface, and this layer is attached plinth.Remnants of the mixture are removed, they can cover up the cracks between the skirting and the wall.

Note!Fillers for mounting plinth is not necessarily to buy, it is possible to prepare on their own.

Cooking composition with his hands

When deciding what is best to stick ceiling moldings, you have decided to use a filler, it is necessary to consider the method of self-catering.To do this will need the following materials:

• Finishing mixture;
• PVA glue;
• Water;
• net capacity.

Note!As a basis we can take the finish putty from any manufacturer .The process begins with the fact that, in a clean container is filled with plaster finish.Next, the PVA is added a one-fourth of the volume strewn finish mixture.Then gradually add the water, the composition is constantly stirred as much time as needed to obtain creamy thickness.

Once the desired consistency is obtained, ready-mix should infuse for five minutes, and then it is mixed again.It is necessary to closely monitor so that the mixture does not form lumps and clumps.Use ready-mix can be a half to two hours.