Sophisticated design of the drywall without the help of the masters

Construction of plasterboard for different needs

Load capacity depends on the material sometimes not so much on his strength, but also on the associated structural solutions including the carcass, when it comes to covering plasterboard walls.The material itself is not particularly strong, it can withstand up to 12 kg per 1 square meter.However, if there is a simple single-frame drywall resistance increases sharply, and it is able to survive even under a load of 50 kg per square meter.

Deciding to use this material with a maximum benefit for themselves, that is, having decided to build it from the shelf, you should immediately decide whether they will serve to accommodate, for example, a collection of tin soldiers, or are you going to use them with the utmost efficiency.

In the first case, you can simply use for the construction of small pieces of plasterboard material fixed to the wall horizontally, and for the second option, you need to build a three-dimensional hollow frame structure.

shelves of plasterboard - just beautiful, functional

If the ceiling structures commonly used gypsum board thickness of 6.5 mm, flexible enough to create with the help of three-dimensional figures, the shelf you'll need a more powerful cover.The standard thickness of the drywall in the range from 6.5 to 12.5 millimeters, but there are also more durable sheets - 15, 18 and 24 millimeters.

For shelves can be used sheets from 12.5 to 24 millimeters thick .However, the material is somewhat more expensive.Therefore, if the shelves of plasterboard you want to get bulky, as an additional element of design space, the front of the plane can be made of strips of 6.5 mm thickness.

Made this design is very simple, for this you need profiles, suspensions, universal and corner connectors, as well as guides, from which, in fact, begins assembly of the frame.Forming fixed on the floor and ceiling guides the future position of the back of our design, we put them in the vertical profiles.Then fasten the ceiling hangers and set profiles to the front of our rack (the design on the wall - the most practical option).

In fact, the whole process is similar to the lining the walls of plasterboard, but the difference is still there.The horizontal facial profiles with the main form the basis for laying gypsum boards, they are fixed to the sides of the profile is flush with screws.The front portion of the stack is covered with flexible segments of drywall.At the end of the frame facing all surfaces are treated filler and then painted design.

Building a wardrobe of plasterboard

profiles that can refract at any angle using nadpilov boards, along with easily treatable with plasterboard, are ideal materials for making structures of any complexity.At the same time the strength of structures will depend on the project you compiled, which should take into account the installation of the frequency carrier profiles and the overall cost of the material (which increases with the number of parts).

horizontal parts of the cabinet frame mounted to the vertical by a type fasteners "crab".

compartment for enclosure there is no need to build a shelf, since the bulk of it will occupy a space for hanging clothes, but you can do and if you want to.For this purpose, from the extreme right or left of profiles is measured 500 millimeters, and another set number of vertical uprights, which are connected to each other and the outermost horizontal elements.

In this part will be placed compartments for small things, everything else will take space in closet. If you intend to do closet wall to wall, profiles for side walls need to duplicate the mirror with an interval equal to the planned wall thickness.When plasterboard lining is finished, set the skids for preformed sliding doors made of chipboard, and the cabinet is ready.