Why putty for laminate and qualitatively carry out repair of the surface ?

about laying laminate

To understand how to put together a laminate, you must familiarize yourself with some of its rules laying.One of the most important points is the floor leveling.So, all the irregularities eliminate using screed or thick lining.After buying the material needed to stand for 48 hours in the room where it will stay up.The coating used to the indoor climate (temperature, humidity).Compound laminate is perpendicular to the window, so all seams are less noticeable.

Note!To fix the panel in front of the deformation gap wedges are used.

Before laying necessarily retained a deformation gap between the wall and the first panel.If the way of laying have obstacles, the panel sawed place so that it stood exactly.Between the tube and the panel should be sure to leave a gap, he subsequently closed the special tab.In the second row there is already docked laminate easier.The panels of the second number of factories in the joint between the laminate and the laminate at an angle of 45 degrees, must be mounted on the lock and snap.

brings beauty

After the laminate is fully laid, the joints are, that spoil the appearance of the coating.The joints of the laminate are an indicator of the quality of the work performed.For their closing, there are three types of thresholds:

• Direct - needed for straight seams, which are at the same level;
• Leveling - are able to connect different areas of the floor height.Flatten drops in 3-18 mm;
• Finishing - used to draw the edge of the catwalk, the approach to the threshold, stairs and so on.

Each joint profile for laminate forms a small protrusion on the surface.But many want the floor was perfectly flat.These problems can be solved by using cork compensator.It is a strip of cork, which is glued between the plates of wood.Cork at 10 millimeters thick can easily be compressed to 5 millimeters, and easily returns to its previous state.That is, the material is easily compensates for movement of the floor and eliminates the need to put the sills.

Getting rid of cracks

reasons for chips, scratches and cracks can become a movement of furniture, walking on the surface of the thin heels, various acute and fall of heavy objects and so on.In areas which are particularly heavily used, there may be a mechanical damage.They do not only looks unsightly laminate, but also allow the water to fall into that leads to swelling of boards.

Grout for laminate capable of eliminating these defects.Its application makes it possible to restore the surface and a layer of protection, which is crucial to prevent the penetration of moisture.Before you put grease damaged area carefully smooth out the surface from dust and dirt.Then around this place is stuck masking tape, and instructions to apply the solution.After drying, place it polished.The color of putty is necessary to accurately pick up, so that it has merged with the general coating.

Important!In order not to spoil the surface of the laminate, using exclusively manufacturing Putty.

independently invent the putty is not recommended, because its structure can cause damage, which force you to completely change the portion of the laminate.Industrial paste tailored to the composition of the material, so they perfectly adhere to the damaged area, making the restoration of the long-lasting.Such a mixture allows you to repair any type of laminate floor and doors.