Board antiseptic for those who are not alien to prudence

As the board gets its antiseptic qualities?

Many tree species are resistant to the fungus that causes rot, but to be fully protected from it wood can only after special processing solutions.So, after a certain kind of procedure, the board is formed antiseptic, in fact, different from its original state only some of the new features.However, external changes may also occur, such as changing the color of the wood structure that can be used to decorate the rooms and the house in general.

There are several ways antiseptics lumber processing.This dive boards and bars in the hot and cold bath with the composition as well as pressure impregnation, followed by manual handling of special pastes and finally, surface treatment, dry and wet.

most reliable, of course, is impregnated under pressure, though this method is the fastest and, dipping the lumber into the bath with the solution takes time, and the surface treatment is short-lived .There is another method - processing solutions based on oils used for wooden parts of structures, which are located in the open air.

What does the preservation of lumber?

greenish or brownish mold corners log house, eaten by insects floor beams, blackened by the fungus causing rot crowns - what could be worse than all these disasters, falling on the owners of a country house?Perhaps only the fire.

However, and from all of the above timber can save by impregnation with special solutions, some of the methods of this procedure are listed above.Antiseptics are different directions, highly specialized, only protects against insects, mold or fungus, as well as complex.

It could be considered antiseptics and flame retardants that protect the wood from the fire, because they contain additives that increase the stability of sawn timber to rot or mold.Conversely, some antiseptics quite successfully increase the fire resistance of wood.

Remarkably, the duration of action of drugs depends on their components, and the highest quality of impregnation, which are based on metal salts, turned out to be the most short-lived, they are easily washed out of the structure of the wood moisture.What else is important to know - if the tree still turned attacked by rot or mold and the result is dark and the beginning slowly but surely break down, you can apply the whitening antiseptics, they successfully destroy pockets of fungal diseases.

Where antiseptics used for lumber?

biggest problems with the wood occur at the point of direct contact with the environment - it's doors, roofing, window frames.Also require protection wooden elements, which are located in close proximity to the ground, that is, in the basement, as well as exposed by precipitation - is, of course, a roof.

Do not forget that if you decide to build a log cabin, each plate should be soaked with an antiseptic composition for protection against insects and from fires.

As for the roof, there is a particularly close attention should be paid to the rafters, purlins and came down, and the ridge beam.In the case of leaking roofs, these parts of the roof structure may be moldy or begin to rot in a few days.

In the basement of the tree is usually small, but lags supporting overlap between the underground and the ground floor, as well as wooden flooring, require careful treatment for the simple reason that the dampness has a habit of climbing out of the basement, passing infecting all the wooden parts rot.And whether it is necessary to mention the insects that just might sneak into the basement from the ground and from its bowels - all kinds of larvae of beetles and other attack.