Local repair paint - little effort to upgrade the surface

assess the extent of damage

environmental stress or mechanical damage paint layer may deteriorate.It may occur defects such as chips, cracks, delamination.As a result, you may need to restore the paint.In some cases, it is enough to make small repairs, and the product will again delight in others it will require more effort.Whatever it was, it is important to know how to repair is done.

First, consider that includes a small repair refinishing.The schedule of such work should be an annual event.The fact that even small cracks may eventually develop into serious damage threatening, for example, the roof corrosion.For small works include surface leveling paint cleavage crack repair.

plan to repair paintwork

Handling this laborious and requires "perseverance."To do it, you can see a specialist.You can do this job and yourself, if the problem is a small amount.Let's begin the discussion of how to perform a local repair paint with their hands.

Here is a list of tools that will be needed for: grinder, abrasive paper, grinding paste, paint and varnish.The main tool - the patience and desire.When the work is done with his own hands, it is possible that the coating will be uneven.It's not scary.The place where the coating acts on the general background, can be sanded using a special paste.

applying the stencil to restore layer can localize irregularities.In this case, the surface aligning will be easier and faster.To the stencil does not slide, it is possible by means of an adhesive tape to fix, but the cut or hole should be done with a small margin as compared to the correctable problem.

to align paint was perfect, you need to monitor the amount of use of a repair paint and layers of varnish applied.You can not overdo it with the amount of ink.You also need to be careful not to offend a good site.When a small bump, grind, you must manually by holding the abrasive paper between his fingers.

main stages of resurfacing

repair chipped paint begin with, select the desired color and paint tone.How to do it?The best option would be to take a small piece of repaired structures and go with her to the store.And what to do when this is not possible?We'll have to pick up on the eye, or several times to run to the store and change the wrong tone.

To begin with we define the depth of cleavage.If the lower surface of the metal, and how deeply, then made of metal grinding stripping corrosion.In addition, it may be necessary to apply a primer, if circumstances require.

Also before painting it is necessary to read the instructions, there should be stained with the product to handle anything.If - yes, and do while using a stencil.Layers of paint should be a little as the final stage of the work will cover the work area several layers of lacquer.If cleavage is located on a small surface area, the entire area can be covered with transparent varnish.

To see the possible irregularities, use a conventional light bulb, giving light to the surface at an angle of 15-20 degrees, and mark these places.Since the varnish and paint to dry for several hours, the entire stage of the work may be delayed for a few days.If the crack is small, increase it slightly abrasive and act in accordance with the above recommendations.