Glass, reinforced - especially safety and aesthetics

Features reinforced glass

This glass could crack on a myriad of fragments, but never fall out of its mount.Therefore, it is used in areas of possible occurrence of smoke and fire, like the firewall.Apply on staircases, in the back of the device and translucent walls in large rooms.Its integrity when a large amount of the sheet is higher than that of ordinary glass.

the latter rarely do large, it is dangerous even in draft.Also reinforced type used in the production of lanterns, various vandal-proof structures in glass for balconies, terraces and loggias.Its use in the warehouses of combustible materials has become a fire safety standard.

Specifications reinforced glass

Wired glass, the technical characteristics of which have their advantages and disadvantages, is manufactured using a metal mesh.The grid is made of chrome-plated or nickel-plated steel wire diameter 4-19 mm, the cells are square or hexagonal.

grid imprinted into the 1.5 mm from the surface.The total thickness of the sheet - 5-6 mm, maximum - 1500h2000 mm.Glass is flat or wavy, clear or colored, matte or polished.Color option is obtained by adding metal oxides to the still fluid mass.This rich shades of golden yellow, green, pink, purple and blue spectra.The surface can be molded or patterned, wherein the pattern repeats grid pattern contours.

As a rule, many of the product can tell GOST, wired glass sheet on the documents should have mesh size from 12.5 to 25 mm, are not allowed to have bubbles in sizes from 3 to 6 mm, and foreign inclusions.The main advantage is that the pieces held in place by a grid and cracking in case of fire or impact does not cause fragmentation mass capable injure humans.

Fire and smoke can not overcome the glass, and the spread of fire stops.Contact with stones or hitting it too safe, fragments remain in place.Of the two sheets of glass are made of reinforced triplex, multiple - bulletproof bulletproof glass.The lack of it has only one, this decrease in strength as compared with the usual almost doubled.

What is wired glass in your work?

How to cut reinforced glass?It is quite difficult, because on the cut line the glass is bent, but continues to hold on the metal grid.In this case, the piece to bend all the way and part of the holding wire cutters bite.The disadvantage is that it is difficult to remove small pieces of canvas and customized size.

reinforced glass cutting best done on automatic carved tables, which provide high cutting speed and accuracy.When cutting, it is desirable to take into account the direction of the mesh.

Wired glass 4 mm are more likely to apply for registration of loggias, balconies and terraces, it is inserted into the woodwork or aluminum profile for a cold glass.Special care for such material is not required, except for the removal of dust and dirt.But it due to their fragility and low strength should be protected from mechanical damage, post-injury list will have to be replaced.

aesthetic properties are great, the room can be saturated color and protect against fire.Cutting the sheet can be of any pattern and the use of public buildings will save many lives.This is a long-term and reliable building material.