Hipped roof - what house this protection ?

hipped roof - whether to use this option?

Any shape of the roof has its advantages and disadvantages.Of course, the advantage is represented by the type of external beauty devices, as well as improved heating of the attic.The size of the attic is much larger in size than in the regeneration of other types of structures.

Especially chetyrehskat is sufficiently strong, sustainable and functional roof.However, there is a drawback - the complexity of installation, the entire roof is very heavy.It is impossible to equip himself, but a couple of teammates is quite correct the situation.

Area hipped roof necessarily calculated and depends largely on the complexity of its configuration.If the roof is shaped like a pyramid, in order to calculate its area must know the simple formula for finding the area of ​​a pyramid.In principle, it is necessary to calculate the area of ​​each slope separately.All calculations must-check.

hipped roof Rafter system - where to start construction?

Before hipped roof will start to grow over your home, all the necessary materials and tools you need to pick up.Also, no harm will be drawing the design on paper.From the materials needed: insulation, waterproofing, steam insulation, wooden beams for the arrangement of roof system, roofing material, material for the crates.From tools: drill, screwdriver, hammer, nails, screws, level, tape measure (you may need other tools).

First of all, must be mounted truss system hipped roof.To begin settling the basis of the system, which then will be installed vertical rafters and manufactured, in fact, under the roof construction.

Next, a ridge beam, which is used for level and plumb.Now you can mount the slanting roof timbers of which are formed and the future of the roof plane with overhang (up to 1 meter, depending on the maximum wind power in the region).Next

mounted side ramps and intermediate rafters.Keep in mind that the roof can be heavy, so truss system should be strengthened as much as possible.

Design a hipped roof - the final stage of construction

After mounting device hipped roof provides manufacturing crates .For this use too, wooden boards (50 or 40 mm).The material must be of high quality and well dried.

Before packing crates need prostelit film that will insulate the roof from steam and moisture.Mounted on the film by means of staples.Naturally, we can not forget about the insulation, which settle in the attic.After that, the device is a hipped roof.

Next hipped roof design provides for laying roofing material.Choosing a roofing material may be to your liking.Naturally, it is necessary to take into account the shape and structural strength.

Attach material must be firmly and accurately, and to do it so that rain could not penetrate, and the wind - to disrupt the fragments of the roof.If, however, for you do not fully understand the written instructions on how to do hipped roof, the video can be found at the end of this article.