Face tile under a stone - the spirit of antiquity in modern style

The interesting facade tiles under the stone?

Wild stone, it would seem, lies under the feet, bend and lift it, and then you can even use it for construction, to finish at least.But this is not true, for the same cladding, both internal and external, is necessary to handle the pieces of rock so that they have turned into a kind of tiles, even formless.

And just like crushed stone plinth tiles can be used without any treatment.In general, natural materials are always more expensive artificial, and it refers to any rock.The same stone type facade tiles will cost you a minimum of 2 times cheaper quality processed minerals, selected from nature.

choosing, for example, granite, you agree to keep untouched piece of nature, because if all the houses, lined with artificial stone, covered instead were real granite, not one rock would disappear from the topographic maps of geologists.

is made stoneware, otherwise referred to as artificial stone tiles made of cement-sand mixture, with the addition of fillers and plasticizers

.To get a solid lining, the material undergoes a block-making process.Texture is stone is infused with the help of pigments, as that often used metal oxides as the most durable.

As used fragmentary stone facade tiles?

rock Imitation may be different, both in the form of rectangular plates and formless, for example, made by a wild stone image.To some it may seem that such material is not convenient in use, but on the concrete blocks of the cap or on the cast strip foundation facade tiles fragmentary stone can be laid quite simple.

Despite the awkwardness and the formlessness of a tile, one side she is relatively flat, that she is the face.we do not even need therefore a tool such as a hammer bricklayer, but a rubber mallet should be at hand.

Laying tiles is carried out under a stone on a prepared, clean surface.On land, a little larger in area than the artificial stone in your hand, applied to "cake" of cement, which should be as deep as possible to press the lining material tapping hammer.Next to the base lies another lump of mortar, and the next tile is fixed next to the previous one.

desirable to leave between them a gap the width of which depends on the dimensions of the covering elements than they are, so, consequently, the gap can be wider, which, incidentally, is almost flush with the surface of the tile is filled with mortar.

Once started laying the second row facing a wild stone, the voids between the stones of the first and second rows are completely filled with grout, the excess is removed stiff brush.

tile under a stone for exterior finishes, where it is better to use?

There is such a thing as the compatibility of the materials, and sometimes the building can look ridiculous only because the lining of the cap and walls did not look together. The design of the building should not only be harmonious forms, but finish.It would also be the wrong solution used the same artificial stone for the facade and basement.Imagine the house, completely covered with the same type of veneer.Yes, it will resemble a fortress, but the beauty of it is not.

best if at least two versions, you will have at hand a stone tile for exterior finish.For the walls will be the ideal choice rectangular elements facing outwardly it will look as if the house was built of rough quarry stone treated, such a kind, the harsh beauty of the old fortress.

Especially since today there are technologies that enable visually artificial stone age.If you have flagstones under a rock, you can put it on top of the blind area of ​​the track, and the same material used for the lining of the cap.Such a wide belt around the building, which goes from a vertical to a horizontal position, will create a kind of massiveness and solidity of the foundation of the entire construction.