The glue foam : a dilemma or a simple solution ?

The glue foam for insulation of walls?

So, how to glue the foam, and most importantly, what it can do?Repellent is a few guidelines that will help determine the type of structure.Firstly, you need to consider the type of the surface on which the installation will be made of insulating material.Secondly, you need to pay attention to the very type of insulation.All other characteristics are not important in such work.

Important!Any adhesive selected should not contain acetone, benzene or other solvent which can react with the foam.

In some types of work may be necessary to foam bonding with each other.For this purpose, any adhesive can be applied wet or dry type, which does not contain solvents.With such insulation compounds and mounted on the work surface.

bonding process and its features

Bonding foam has some technical features to which you want to look closely before you begin the installation work.The adhesive foam is performed by applying adhesive piles in 5-6 places a sheet of material.If the material will be additionally secured with dowels, the sheets are glued must withstand the amount of time required for drying the composition.

Important!After mounting the sheets should refrain from touching them, not to move the individual elements of the insulation until the until the dry composition.

In order to determine to what can glue the foam, you must clearly define the scope of the sheet material.If the sheets are to be used for thermal insulation of the interior space frame walls, the composition can be selected in a random order.But if it is lining the inside or outside walls, and the staff should be of an appropriate class.The outer skin of the facade requires increased adhesive that resists environmental effects.

Mounting on certain surfaces

The paste foam to concrete?This question can be considered as the most common, in fact quite the cold concrete walls, which in turn requires high-quality insulation.The most common structure for such work is considered to foam bonding foam.Such an element is manufactured on the basis of polyurethane which is in the mounting cylinders.

Important!When using such cylinders will need to purchase a special rinse that does not allow the structure to dry in the tube. Application polyurethane mixture provides the following benefits:

• Quick and easy installation;
• the best possible grip heater with a working surface of the wall;
• relatively low cost;
• Capable of handling joints between individual plates, the distance between which is less than 2 millimeters.

also described foam allows you to answer the question than to glue the foam to the metal.Polyurethane structure perfectly adheres to any surface, but its application should be very careful.Use of washing will reduce the cost of purchasing additional cylinders that may be required in the case of drying used tank.