Sewage collector - all of the major elements in the sewage system

care problems runoff in cities

Every home, enterprise, public institution in need of drinking and technical water, which forms the waste water.Internal sewerage system is connected to the street sewer collector, except in cases where the individual waste water treatment systems are cleared.

to discharge effluent always bias provided, so connect the sanitary equipment in the building of municipal sewerage network is easy.But in the cities is often the case that the room is below the level on which the sewer, and there is a free flow.If it is not filled with active, the drain terminal of such premises is not possible.However, if the collector is subject to strong content, overpressure occurs, which leads to flooding water reverse current.

To resolve this problem, use a check valve, which saves space by flooding.Also, in low-lying areas of the city applied pressure sewer that can more effectively take the drains.You can set individual pumps, improving drainage effluent from the low areas of the city.

Note!recommended pumps operating autonomously for these purposes.

Pump - help drowning

acute problem of sewer liner is for residents of private homes.We will understand how to do it and connect to the output collector.This is the main problem, if the house is not of individual treatment plants.For houses located on a hill, it is very simple: do supply sewer with access to the street network of communications, and waste by gravity fall into them.It is more difficult, if the house is lower than the level of the reservoir.Then it is necessary to make the pressure sewer from the pump.

pipe two kinds are used for a sewage:

• PVC (PVC);
• Polyethylene (PE).

to 90 mm diameter pipes are supplied in coils, which reduces installation time.Pumping stations can be placed inside the house and outside.The pump can operate for a long time without overheating, thanks to robust construction, giving the unit greater strength.

Note!The reliability of the pump all the parts are made of high-strength steel, but it can serve as a guarantee of its quality.

The principle of

To ensure that all waste is put into the reservoir, it is necessary to competently executed eyeliner sewage, only this ensures reliable removal of sewage.Correct the system operates as follows: all the wastes are moved to a special airtight container, then they pump are crushed and pumped into the treatment plant and collector.

Important!Design pressure sewer complex undertaking, so it is best to consult a specialist.

pipe diameter for this system is 32 mm, and their thickness is calculated so that the flow rate was not more than 0.7 meters per second.When you reach this speed comes into the system self-cleaning sewer pipes.

Advantages of pressure sewer:

• Scope of excavation is less;
• Through the use of less material over long distances, the cost is lower;
• reduces installation time;
• service life of such a system is designed for 50 years.