The device Russian oven : tips novice master

Russian furnace device: The order of the significant elements

Knowing all the features of the heating element of the device plays an important role in the selection of the correct design of the furnace.If you decide to build such a structure in his country house, then you need to decide on all the components of the device that is helpful in choosing the right construction material and the type of individual elements.

Important!The construction of this device involves the development or acquisition of the right scheme masonry.

So Russian oven podtopkom consists of three main components:

• Furnace;
• Chimney;
• pipe.

Each of these components is crucial and is responsible for the operation of the entire heating system.Russian oven, drawings which can be found on the Internet, mean a sufficient amount of free space in the house.In other words, the very oven must be placed in a location that will not interfere with the passage and placement of furniture elements.

firebox of the furnace - the main element of the design

firebox can be called the heart of the heating structure of any plan, especially the Russian stove.This camera is a certain size, in which the combustion of the fuel material, in this case, wood.The furnace must be arranged in such a way that it is constantly fed air, which forms the general thrust affecting the speed and quality of the fuel.

Important!Dimensions Russian oven should be commensurate with the size of the furnace, which will escalate the desired temperature of the air in the living room. For continuous flow of air under the furnace organize ash pit, which plays two roles at the same time.The first problem is the blower air supply to the combustion chamber, and the second task involves a certain size for the removal of ash.

flue pipe and as a guarantee of quality heating

chimneys called specially laid out a system of channels through which excess heat in the smoke discharged into the pipe.Driving the Russian stove detail tells about how to properly fold the flue inside the heating furnace.

Important!The chimney must not have sharp differences and rough inner wall, it can cause air pockets.

Because a fairly large excess thermal energy which is given to the pipe, the chimney is arranged in such a way as to have the maximum number of turns and twists.This allows additional heat one wall in a building on which the chimney laid.

Special attention should be paid to the pipe, which will have a relatively high heating temperature.This suggests that such a pipe must not come into contact with easily combustible building materials that can cause a fire.Above all, do not forget the difference between the tube temperature inside the house and on the street.Typically, this causes condensation, which could damage asbestos or steel pipe.Ideally, such a tube should be made of galvanized steel.