Installation of the electrical in the house with his own hands - for and against

correctly assemble the electrical self

acquaintance with electrical work to set a specific electrical panel in the apartment or private home can only be the most optimistic people: the connection process is not as simple as he is painted advisers, Do not touch bare wires undervoltage.We do that, too, will not be until at least will understand the general electric board and circuit diagrams based on its installation.

If you have sufficient knowledge in electrical engineering and the necessary skills to install the electrical panel, or at least raise it with their own hands, just as you can.We assess and determine the four basic parameters of power supply housing:

• estimated power consumption of all the electrical in the house;
• electric power consumption for each planning group;
• number of these groups of electrical appliances;
• circuit wiring and installation of a switch a desirable place in a private apartment or house.

first three items require the most technical knowledge and extensive calculations, the fourth needs some explanation.Under the scheme in-house installation of switchboards are divided into internal and attachments.The first option is the installation of electrical panels is familiar to most residents of apartment buildings: the location of the ladder liner networks and electricity meters (metering and calculation) with a well-organized centralized their repair and replacement system.Perform installation of the latent installation of a switch as soon as possible in a country house, but do it in a city apartment with his hands will be problematic - the walls have thin.Outside, cottage version is much easier to use, but aesthetically, of course, loses.

start the installation of a switch board

decision has been taken, the eyes are not afraid, but the hands are starting to do something about it.First, we define three important points.

1. size and design.Count the number of energy groups, which correspond to the wiring diagram.These data determine the number of modules (single-pole machines) required for full power.their dimensions are known, ie,the model of your switch board to evaluate snap.The material can be chosen arbitrarily, but the metal is clearly preferable.
2. Where will install .The question is not so simple, because must take into account three factors.First, security: the foolish children should not have access to this safe (mean height and key).Secondly, the approach should be made convenient for emergency work and the ordinary meter reading.Third, a massive electrical panel in the wrong place can break the design of your home.
3. What not to do .Actually collect and carry out installation elektoschitka (mount it on the wall, landing the right machine for DIN-rail, liner groups), you can and with his own hands, using videos for a given search, but do connect to external networks, we do not advise you without the participation of professional electricians.

Remember the rules and regulations of installation of boards

collect their own switchboard, even made on the personal project, you no one can deny.Wooden crafts and common open hinged flaps work well in our apartments and country houses.Installation Installation of electrical distribution panel, you can do it yourself, if such schemes are easy to read.Distribution RCD liability zones is also not difficult.

screwdriver, pliers and a tester in your hands, connect the wires of the desired section in the terminal is likely to succeed.Next will have to deal with the local power grid company, which will include a welcome light in the kitchen only after a number of approvals and approvals.

encourage, in particular, to get acquainted with the provisions of SNIP 02/31/2001, the Federal Law of 26.03.2003 number 305-FZ and the RF Government Decree of 27.12.2004 №861 with the March 2009 amendments.We assure you, this is just the tip of the iceberg of a bureaucratic, all kinds of specifications of local importance can permanently discourage collect something with their hands and switchboard as well.Therefore, before you buy and assemble the new electric panel in the country, consult with a local electrician.