Plastic pipes for hot water - how to choose?

Advantages polypropylene compounds

1. service life is several times the durability of other communications.
2. absence of flow due to the smooth inner surface of the walls, which do not accumulate fat.Have a low flow resistance.
3. No corrosion.
4. chemicals do not affect them.
5. pipes have such a level of reinforcement, even when freezing will not cause to rupture and leakage.
6. thermal conductivity is low and does not become a reason for reducing the heat in the heating system.
7. Easily mounted.The pipes can be installed even to without the use of any special tools or soldering.
8. security products and devices for human beings.

In addition to all listed, separately worth noting the speed of installation, since the steel of communication are established much longer.

But the main difference is the internal section, which in PP products does not decrease with time, and the steel acquires major limestone deposits.

Also, there is no need to clean, paint and oils communication and hammering in the system does not affect.

Physical characteristics of pipes for hot water

noteworthy that plastic pipes for hot vodosnabzheniyaotnosyatsya to a synthetic material which has several properties simultaneously.Flexibility and hardness, with a hardness that counteracts mechanical impact and flexibility that is inherent in all the polymer derivative.Extreme softening and melting temperature of the tube - 150 °.If heated to 180 °, the resin will flow and gradually turn into a viscous liquid.

As pointed out by most manufacturers, software products perfectly withstand the maximum water temperature of 95 °, so any temperature rise only harm, but as in all heating systems and heating water temperature is not above 95 °, problems can be expected.

There are certain areas where the system can work, and more than angle 100 °, but more often it is used or reinforced pipes, or increase the pressure in the system.

PP pipes with reinforced

reinforced pipe is always maintained thermal swings upward.It consists of the same plastic pipes for hot water, but with protection against bursting open, provided a layer of putty, and aluminum foil.

How does reinforcement?

1. foil layer of aluminum.
2. any layer of fiberglass.

Foil not very successful in the sense that if there is contact with water, may be electrical activity that causes corrosion.Therefore, it is necessary to use glass, which is not electricity, and service life is several times higher.

in reinforced polypropylene pipe lay 2 layers, between which the fiber and fiber glass.The three layers are welded, to one another in order thus providing extreme resistance.

This strength becomes the key to safety in working with high water temperatures and the greater weight of the whole structure.Unreinforced compound when heated may swell and burst.

Plastic pipes for heating

Plastic pipes for hot water and heating systems have many common stereotypes about their unreliability.Stereotypes do not correspond to reality.Communications are reliable for domestic hot water and heating for the above mentioned qualities, in addition, they are much cheaper than steel communications, and easy to install.To install the necessary Only one soldering iron for plastic.

their low weight also plays an important role, since even on the roof of a building can be constructed compounds.Reliability is not inferior metal.

In conclusion, it must be said, that the polypropylene tubes are able to create communication with almost all kinds of materials, which may include steel.In addition, the scope is not limited to hot and cold water systems, and are also used to install drainage, irrigation systems, private areas of the house, gardens and greenhouses.Due to its flexibility and light weight of their installation brings only pleasure, as happy that you can set absolutely any water supply scheme.

And as mentioned earlier, pp pipes are not subject to corrosion and deposits on the walls.And care for them so simple that allows us to say that they are ideal for heating and domestic hot water systems.