The threaded pipe on their own?

Toolkit to create a thread

Tools from the list of cutting is called threading sets.

Its composition:

• Die and die stock for threading of different diameters.
• special holder, which is placed in the die stock.Also it can be clamps and measuring tongs, etc.

The threaded onto the pipe: general recommendations

process is carried out by a certain algorithm.If he does not comply, then the marriage breakdown and catch up very soon.

What should be the tool?

1. He should be in good condition and is sharp.
2. Working tube pre-prepared, cleaned of layers of paint, rust to the metal surface.
3. file or grinder to remove the outer end of the chamfer.
4. Cutters and work surfaces should be lubricated during operation.I use a special liquid or grease.Is applied prior and during robots.

The threaded on the tube: die

Plate looks like a nut, tool steel, and in the middle of her special cutting elements.Between these elements (edges) posted an outlet for swarf.This kind of cutting can quickly cut all kinds of pipes.

Order of work:

1. vise or other device clamped riser.
2. pipe trimmed to the color of steel and with her chamfer.
3. plate was inserted into the holder.
4. Apply grease to the cutters and pipe.
5. necessary to combine the end and die exactly perpendicular to the pipe.If the bit skew, then the work will be spoiled, and pluck the threads.
6. thread by turning the holder clockwise.
7. After erupted a couple of turns, the plate is returned in the opposite direction, thereby purifying of chips.It is worth doing slowly and carefully.
8. Cutters on the instrument must be constantly lubricated with a special liquid.
9. After the second pass and the last round is necessary once again to cut the thread.

The threaded on the tube: die stock

This device differs not less functionality than die, but more modern.Composition: the grooved holder, which will be interchangeable cutters.When it is blunt, blades easy to replace, so it provides the economy.It is also easier to work with die stock and cut, it is lighter in weight and is safe for use.There mehanicheskiepovorotniki governing the rotation accuracy.

The new models are equipped with die stock noisemakers that allow the holder to turn in only one direction and not lose the quality of work.

sequence with cutting die stock is:

1. working surface is fixed firmly.
2. die stock of a certain diameter are placed in the holder.
3. Cutters on die stock and pipe necessarily need to lubricate.Also lubricate during operation.
4. pipe edge placed in the holder.
5. Turn the handle clockwise and cut the thread.
6. When finished cutting die stock still need to turn the time as the plate, in order to your result was fixed.

The threaded on the tube: Electric die stock

Electric die stock differs from the previous presence of naturally motor due to which the process is greatly accelerated and become better.The process of working with this device takes place in several steps

1. Fixing clamp workpiece.She bought complete with die stock, and to start it, simply press the button.
2. There thread in seconds.Die stock has a mounting which fixes the pipe.

Any job, no matter how light and unpretentious it may be, is not immune from the marriage and imperfections, but any scheme has loopholes in order to avoid undesirable results.We present to your attention a number of ways of how to get rid of the marriage:

1. Use quality tools, since otherwise have to pay for the damaged workpiece from blunt or rusty teeth.
2. Apply grease to the coils in order to avoid breakdown and cracking.
3. Do not press too much carving because efforts can provoke damage.
4. diameter pipe and dies should be commensurate.

last tip out the items for the entire cutting process.Buy a high-quality appliance and adhere to the recommended!Do everything carefully, carefully, and then a good result will not take long!