Brick oven Garage - comfort at any time of the year

Construction of the garage with his hands

Building brick shelter for the car - it is a complex, costly and time-event time.Construct brick garage with his hands in the following sequence: installation of foundations, erection of walls, installation of roof, interior decoration.Before the construction necessary to determine the size of the structure.Thus, the standard dimensions of the machine are approximately equal 2h3-4 meters, which means that for a comfortable stay in the garage of his size should be 4x6 meters.

determine the size of the garage, it is important to take into account the fact that the car in the future can be changed.In this regard, the project should consider this option without the need to restructure the garage for another car.

Foundation will not bear significant loads, so it can do melkozaglublennym protruding above the surface of 100 millimeters.Masonry walls made M100 brand brick on a cement-sand mortar grade M75.Necessarily done with wire reinforcement.Gender is a concrete thickness of 150 mm with the reinforcement fitting step of 200x200 millimeters.The roof can be made of reinforced concrete slabs or wooden do.

Construction heater

owners garages important that the heater does not take up much space in the room.Also pay attention to the following points:

• Quick warm room;
• The ability to boil water, dry clothes and building materials;
• Ease of exploitation of;
• Have the chimney for the period instrument downtime.

Note!Find a scheme that will be perfectly suited to your garage, not always possible, so you must be ready to make some changes in the design of the course work.

All these requirements are met by a brick oven garage.Its masonry is very similar to the simple laying of the furnace except the more compact dimensions.There are many different variants of the heater, so the scheme should be selected before the start of its installation that best meets your requirements.

After decide the type of stove can begin its masonry.First of all prepare the workplace, putting on him a film of polyethylene.Next to it pour sand layer one centimeter.On this basis will be made of brick masonry, the average is 11 rows.Under the scheme, each new series make their additions.Once the oven is laid out, it is necessary to clean up the seams, surface decorate filler, whitewash, or impose tiles.

brick oven for the garage without insulation - money down the drain

Construction of a brick garage does not necessarily imply its insulation, and even for the heating furnace is not able to provide a comfortable temperature.This is due to the fact that the bare brick has a high thermal conductivity, and all the heat that generates the heater, will disappear very quickly because of this.To this did not happen, it is necessary to make insulation brick garage.

Note!Qualitative considered warming, when in an empty garage temperature is five degrees.

best material for this purpose is a mineral wool.However, it is necessary to arrange a reliable protection from moisture, installing a vapor barrier.Strengthen the material best metal gons.On the wall is marked surface mounting batten with 60 cm increments (this is the standard width of the mineral wool).Next crate and attached to it - mineral wool.Insulation must be cut so that the material sheets were close between the batten bars.Top attach insulation vapor barrier.

deciding how to insulate a brick garage, you need to decide to whether it should be done and the outside and inside.Outside insulation must be largely detached garage.If the garage is adjacent to other buildings, it will be enough to finish it only from the inside.