The ceiling of plasterboard in the hallway

Before you go into the room, we will go through the hallway.And, of course, the first impression depends on this small piece of your home.As space is limited, I want to visually expand it.The ideal option in this case - plasterboard in the hallway, on the condition that it will be issued spotlights.

Benefits ceiling plasterboard

Plasterboard is a versatile material to makesmooth surface, and apply the concave, convex and curvilinear shapes.Producing plasterboard in the hallway with his hands as video, you need to take into account its general appearance.For example, a multi-level ceiling is used for long and narrow hallway, with a particularly attractive look different graphic line, making more three-dimensional space.Rectangle, located at the center of the ceiling, provides a visual extension of its boundaries.When very small hall will be enough and a single-layer ceiling.

Video installation

before the start of installation you need to decide what should be the height of the ceiling of plasterboard.If the height of the base is small, it is better to place a ceiling mounted as close as possible to the core.As reference station should take the lowest point located on the main ceiling, then at what angle or put a mark, which is placed on the 25 mm lower than this point.This mark is transferred into all corners and angles of the hall.Plasterboard is mounted on the plasterboard thickness below the marks made.

Before starting the installation frame is necessary to consider that a planned lighting in the hallway.If it spotlights the ceiling rate should be more than 100 mm if the chandelier, it is enough to 50 mm.

next stage - the markings on the frame level-stamped labels.According to the zero level of the entire perimeter of the hallway is necessary to fix the guide profile with dowels, spaced 500 mm.Further mounted ceiling profile, space for which is marked on the guide (600 mm between adjacent).

Ceiling profile attached using direct hangers, placed on the wall every 400mm, they are fastened with screws.It is necessary to control the level of ceiling profile, for example, via the tensioned cord.

Finishing strength of the assembly is attached to the transverse webs cut from the profile.They are fixed using crabs at a distance of 600 mm.

next step - fixing plasterboard sheets.In this pre-cut sheets with the desired sizes.For this incision knife 50% on the one hand the thickness and break in two.Then cut through cardboard with the other hand.Planer processed burrs arisen.Mounting sheet is performed in a checkerboard pattern, to a mismatch between the joints.To do this, you should start with the whole leaf, then - half, etc.Fixing takes place on the screws, the swirl flush.After attaching all parts of drywall joints shpaklyuyut.

Photo plasterboard ceilings in the hallway can be viewed in our photo gallery.

Photo plasterboard ceiling in the hallway