Swimming pool in the country with their own hands

Most gardeners have long perceived a "hacienda" not as a means of hard labor and survival, as well as an opportunity to relax after a challenging week of work.The hot summer and the need for the adoption of water treatment encourages to build a swimming pool with their hands, which will be a wonderful budget option for recreation.

Before starting the construction of the pool with your own hands, work out in the construction of a smallornamental pond and fountain in a recreation area, then grasp the construction of high-grade large size of the reservoir.

stages erection

Variety of modern technology allows you to use a variety of methods of construction, which are complex and cost.Today, the traditional method of creating a monolithic cup with a removable formwork will be considered.

main stages of construction cottage pool with their hands will always look like, here are the main ones:

Instructions for building the pool on a summer residence

gathered you build a mini-swimming pool with their hands full of concrete or a pond, the preparatory work will be the same.First is to take the estate plan and determine the location where the next pool.Desirably, the tree was not close.

on open space better water warms up, the leaves will not clog the water, and the roots will not damage the integrity of the bowl.

Please note that you will need a pool depth of not less than one and a half meters for free-swimming adult.It is worth considering that about fifty centimeters will be spent on drainage and wall thickness.is to make routing communications plan and then start work before digging the foundation pit at their summer cottage.To its walls do not crumble, it is recommended to make the slope of five degrees.

Creating a waterproofing layer begins with arrangement of pillows, consisting of 15 centimeters and 15 centimeters of sand gravel.After that is laid two layers of roofing material to enhance waterproofing properties of the pool.The edges of the roofing material must rests on the inner wall of the pit no less than 20 centimeters.

Reinforcement bottom of the bowl is a creation of the framework of A3 rebar and 12 mm in diameter.After that you can start concreting.Ideally, you want to fill the entire cup at a time.In reality, it is extremely difficult to achieve, not particularly professional.

Therefore, the work will be carried out in stages: first floor, then the walls.The bottom is not necessary to make perfectly flat.Requires a small slope about 2 degrees in the direction of the drain.

To tie was quality, it is necessary to apply the vibratory compactors, which will provide higher quality products.While the solution, filled to the bottom, you can go hardens communications gasket.

When the bottom is ready, create formwork for walls.Its width should be no less than 40 centimeters.Equips the framework of reinforcement and connect with a horizontal frame.Thereafter, performed tech robots same as for the bottom pouring.After the solution hardens, you can proceed to the final finishing of the pool.

Looking to our website constantly, you can not only view the photos and videos to make a pool in the country with their own hands, but also many other useful work, as well as professionals to get answers concerning the repair and construction.

Video building a swimming pool with their hands