Shower in the country with their own hands

As sometimes want a refreshing dip in the hot weather in the summer shower.Living in an apartment, this bliss never experienced.But the garden was more fortunate owners.They can build it on your plot.To make the shower the country with their own hands, building specific skills are required.All necessary materials can be purchased at any hardware store.

Materials

We need the following materials:

• board and batten;
• screws;
• shower set (bent pipe, a mixer, an arm, a nozzle, an adapter);
• a garden hose;
• fasteners.

Drawings

Construction of the soul in the country will start from its base, that is, from the pallet.It is a circular shape, in the form of a wooden board.Gender must be made of solid wood.For example, suitable woods such as larch or bangkiray.

For starters, make drawings of country soul with his own hands, and, in this pattern, we will build it.

Construction pallet soul

defined the size of the floor, take the cardboard and set it on a flat surface.Then, based on the size, draw a compass circle within which to draw two squares as shown in the photo.This will be the template on which to build a wooden floor.

It will consist of three layers.First, you need to prepare the 4 boards.Their length should correspond to the length of the sides of the square, inside the traced circle.Further, exhibiting boards on the outer sides of a square.After that, we put a compass in the center of the circle and draw a another circle, but already on the boards.

Then, jigsaw or hand saw, sawing them drafted markup.As a result, the board should be obtained, in which one side is smooth, the second semicircular.Board 4 form a first layer forms the floor.The second layer is similar to the first.

Connect it between themselves, self-tapping screws.But before you do this, you need to install two brackets for the support, which will be installed for the water supply pipe.

One fixture is attached to the first layer of the board.Other boards on the second (top) layer.The resulting gap between the support will be installed fixtures.In the photo you can see how it's done.

to connect the first and second boards layer drilled holes for screwing screws.They should be countersunk head to completely "hide" in the body of the board.Then, the size of the triangles that are formed after the two layers of boards and shapes corresponding Scrollsaw tighten them.Basis for pallet garden shower is ready.

Now you can install support for the tube and "revet" foundation floor rails.The support you need to make a hole through which is output adapter for hose connection.Fixing that holds a support, it is necessary to close a wide board.

It will serve as a protection against water and mount will not rust.The rest of the floor area of ​​the cover strips.Between them you need to leave a small gap for water drainage.

To do the same gap can be to saw little slivers of the same thickness and insert them between the rails.Wooden pallet is made and you can proceed to the installation of the pipe.

Mounting pipe

Today in the shops you can buy a set for the soul, which has a bent pipe, faucet, valve adapter or a hose bracket.

pipe is attached to the support bracket.To it, from above, is screwed nebulizer.Below is connected mixer and adapter.Then, to the adapter, supplied the water supply hose.Outside shower to give your hands ready to use.

Videos Construction soul in the country with their own hands