Build Daily

Making Repairs

August 12, 2017 18:05

How to glue paper and non-woven wallpaper butt - tips and videos

click fraud protection

like - glue - wallpaper - butt Typically, butt glue wallpaper dense, often quite expensive.Therefore, when pasting a surface way butt you need to know some of the secrets to a result of the labor feast for the eyes, but not distressed because of the wasted time and money.

preliminary procedure is the same for any kind of wallpaper, and any method of sticking.It consists in a thorough cleaning and leveling the surface, which will stick the new wallpaper.The way prepared wall (ceiling), and depends largely on how it will look on the wallpaper.There shall be no roughness, convexity, notches.Protruding nails, screws must be removed.





Stripes wallpaper are marked according to their design.If they are plain, that much difficulty is not here.If there is any pattern, it is necessary to leave a margin on the length of the cut strip, as have more and combine parts of one picture on the adjacent bands in the process of gluing.

adhesive composition should be formulated so that there was no lumps;it should be a uniform dough.Instructions on the wallpaper (or label) usually recommends one or another type of adhesive.There are universal adhesives, which are much easier to use.

adhered "butt" of wallpaper is one feature.This method does not require bonding, ranging from the window.Paste can be from any place in the room.Experts recommend starting with the corner better with the one that is closer to the window or door.Away from the angle is of the order of 30-40 cm. With the help of an elementary plumb (bob on a string) is determined by the vertical, which should be noted.According to this line and will focus first strip of wallpaper.

Instruments

first adhesive composition is processed prepared surface.The adhesive is applied in strips, depending on the width of the wallpaper.Thereafter, glue is also applied to the rear side of the strip.Now we need to apply the wallpaper to the wall smooth and good strip for better bonding.Thereafter, the strip should be cut along the length of the top and bottom to necessarily glue dries.

Important! adhered "butt" must be carefully promazyvat edges of wallpaper strips.

should be ensured at work no drafts and the required temperature in the room.It is recommended for greater accuracy in pasting and non-controlling vertical openings applied every 2-2.5 m.

instagram viewer