How do Bio-fireplace in the apartment with his hands - instructions , drawings and video

Bio-fireplace is not heating element.Its main function - improving the aesthetics of the room.Despite its relatively simple construction, the cost of factory models is very high and can reach several tens of thousands of rubles.Therefore, the best option would be the production of Bio-fireplace with his hands.

Design Features Bio Fireplace

You must first get acquainted with the principle of operation of this decorative element, as well as the specifics of the design.Bio-fireplace is composed of the fuel storage areas, and the outer housing of the burner.

principle of operation is based on the factory burners fuel vapors.Couples, penetrating through a special filter screen, enter the combustion chamber.It is a narrow gap through which fuel combustion occurs.

This design provides the following qualities:

• Security.The surface of the fireplace is almost not heated.The only source of heat - the combustion zone.
• economical fuel consumption.Its flow may be controlled by a special valve.
• Ability to other interior details.Externally Bio Fireplace is a small stainless steel box.It can be mounted in any element of the interior, or false fireplaces - read about how to do it.

What is the complexity of the self-production of bio fireplaces?First of all - the right choice of design.Often, attempts to copy the factory model lead to the malfunction of the entire device.Therefore, it is best to consider the possibility of production of the fire on a fuel other designs.

procedure of manufacturing

First, you should consider the design of the torch.You can use a simple tin can, which will subsequently be poured fuel.To create a uniform flame is recommended to use a wick made of natural materials - hemp or jute.

housing biofireplaces

in wooden or steel sheets can be used as a manufacturing material.The latter option is preferable as it is more secure in operation.Then on top of the grid structure mounted platform.It will serve as the basis for the stones.They are part of the decorative Bio Fireplace and do not perform any functions.

Example lattice

order to give a better appearance can perform additional installation of glass walls.They will protect the flame from drafts that will greatly enhance the safety of the entire device.

Bank prepared to put fuel on the bottom biofireplaces, wick through the lattice holes discharged outside.After filling stones layer should stay in the visible region.A similar model can be mounted on a coffee table, a chest of drawers.

complete simulation of the fireplace can be made if desired.To do this, you must first make a drawing of a decorative design.More often than not, its shape and dimensions correspond to a real fireplace.The difference is in the materials used.To do this, use gypsum board and profiles to it.

drawing fire.Clickable

procedure for its manufacture involves the following steps:

• Drafting drawing.It depends on the location - in a corner or at one of the walls.
• Determination of the optimal size.It is important to know what the dimensions of the combustion chamber is not a significant parameter.Those.it can actually make a small adjustment.The only limitation is the flame from Biofireplaces - it does not have to heat the upper surface of the furnace.
• Installation finished burner.It is only after finishing the fireplace.

This design will not heat up the room, and serves only as a unique detail of the interior.

Choosing the right fuel

As an energy carrier it is best to use a ready-made formulations.They are made on the basis of bioethanol.This liquid is colorless and odorless is ideal for creating a uniform flame.It is noteworthy that during the soot combustion is not allocated.

However, during the operation is necessary to remember the following points:

• fuel relatively quickly evaporate in the open state.Therefore, after the extinction of the burner requires complete sealing of the container with bioethanol.
• Despite its properties over time formed soot coating in the combustion chamber.To a large extent it is associated with the dust in the combustion flame biofireplaces.It should be cleaned periodically.

The rest biofireplaces are the most simple to manufacture and easy maintenance of the interior details.To produce and can be almost any scrap materials.It is only important to know the working principle and characteristics of the fuel used.