The screen for the fireplace - choose how to decorate the hearth

Variety fireplace screens today

fireplace grates or screens prevent the ingress of sparks and coals from the fireplace to the floor of the furnace, thus preventing the room from the fire, as well as participate in the circulation of air that allows heat the room faster.They give aesthetic look and fireplaces decorate the room in general.

There is a wide variety of screens for fireplaces of all kinds and shapes.They come in almost any size, as well as two-, three- or mnogostvorchatymi.Fencing for the fireplace, made of brass or bronze - are quite common option.With proper treatment, this material looks impressive and gives the interior a special charm.

for aesthetes with refined taste there is even a so-called antique brass.Colours are also very diverse: from the silver metallic to blue-black.Also possible execution variants of steel, copper, iron, or combinations thereof.Another type of screens - is the finest steel or brass mesh, fixed to the frame.She looks great in a modern interior.

With the advent of heat-resistant materials to shield the fire of heat-resistant ceramic glass has gained the widest popularity.It allows you to enjoy the amazing game live fire in full.

The problem is that the glass screen often prevents the penetration of heat into the room.But it looks modern and stylish.If the heat generated is not critical, the glass screen - perfect.Screens made a stained glass create an incredible visual effect.

screen for your fireplace - quickly and without assistance

to make a simple screen for a fireplace with his hands not need any special skills.To do this you will need a metal bar or corner, pre-cut to fit the receiving opening of the fireplace.To this thick chains attached to small units of any netting, which can be purchased at almost any hardware store.Thereafter

strap attached to the upper part of the receiving opening.Required to adjust the length of the chains on the size of the furnace, a few links of each chain must touch the surface of the hearth fire.At low heat, or when the fireplace is in working order, you can pick up a chain of large diameter wire hooks that attach to the sides of the furnace.

advantages of this screen is that the heat is almost shielded flame can be clearly seen, it is convenient to throw wood on the fire and, of course, ease of manufacture.But there are options for lovers pomudrit and work with metal professional.This will require a little more skill.

Schieber - a little more effort for a beautiful fireplace

flap-gate for the fireplace with his hands on the forces of the person possessing the basic welding skills.Framed valve can be welded from metal corner.Further, the frame drilled holes and welded axle sleeve.For pruning bushes can be used 15 mm tubes of desired length.

bushings need to be welded at the same level that the axis turns freely.Flap, cut from sheet steel, is embedded in a frame and welded to the axle.To secure the gate in the closed position to be welded frame limiter.

To rotate the valve handle is needed, which can be made of brass or other non-ferrous alloy.It is attached to the protruding end of the threaded axis or a welded if steel pen.

Flaps of this design look great without breaking the harmony of the composition.These dampers are suitable for direct wall-mounted fireplaces, and for angle.They are easy to install and retain the heat that builds up at the furnace.