Build Daily

Where To Begin?

August 12, 2017 18:07

How to put concrete blocks with his hands.Videos with detailed instructions

click fraud protection

How to put the house and the walls of the foam blocks?Which is better, the adhesive or mortar?

Unlike brick foam block is characterized by its low strength, because of what has to be maintained at a laying.To properly carry out the construction process, you need to use and install a special reinforcing mesh, which can be purchased at any hardware store.In order to better deal with the laying of using this material, the reader is provided a video tutorial, which details are told all the subtleties and nuances of working with this material.

To produce the correct laying of the first row, you need to make a special cement-sand mortar.It is applied on the surface thickness of 1-2 centimeters, whereupon the waterproofing.She can act roofing, waterproofing or rubemast, it all depends on your finances and preferences.

How to put the house and the walls of the foam blocks ?Which is better , the adhesive or mortar ?

If foam concrete block has the correct shape and on it there are no chips, it can be put on the glue.Before you begin this process, you should familiarize yourself with the advantages of:

  • ensured uniformity of the wall and the absence of cold bridges;
  • adhesive used slower solution, in addition, the foam blocks laying their hands on the adhesive is quicker;
  • After completion of laying it turns smooth surface of the wall, in contrast to the effects on the masonry mortar.

Knowing all the advantages of working with glue, it is necessary to proceed to the next step - to determine with what glue foam blocks of masonry is more suitable.There is no clear answer, because this produces a multitude of building material companies.If you can not buy it, you can use a special tile adhesive, resistant to frost.

How to put the house and the walls of the foam blocks ?Which is better , the adhesive or mortar ?

The first thing to remember - you can not leave gaps in the seams.To apply construction adhesive using a spatula, scoop with a serrated surface.If there is a question on how to put concrete blocks on the base in two rows, the inter-row surface must also be covered with glue.Stacking is carried out gently and slowly.

masonry foam blocks with their hands, and video help in reinforcing their

Before you make a partition of a given building material, it is necessary to reinforce the wall.

Every 3-4 series should be reinforced with a special welded masonry tiles.It is laid directly into the fresh joints.If the correct start and make the laying of foam blocks, it is possible to eliminate the occurrence of cracks and increase the stability of the wall.

Masonry foam blocks with their hands , and video help in reinforcing their

will help you understand the instruction located in the video, how to put the foam block with reinforcing mesh.This mesh is made of wire approximately 5.3 mm in width, that is, laying his hands to do using the adhesive will be difficult.To solve this problem, you must perform a reinforcement by means of reinforcement, which is included in Realized grooves on foam blocks.You can clearly see how to put concrete blocks in the video.In addition, the audience will talk about the proper installation of floor slabs.They can not be laid directly on the concrete blocks, as there is a possibility of creating a point load.Therefore, before laying the exercise, you need to install a concrete Laying nets.Less of this belt is that it violates the insulation.To later could safely settle in the construction of the wall tiles, the belt will need to insulate.

Video will help you understand the basic techniques of masonry foam blocks with their hands.Sufficient width of the wall of the material for middle latitudes is considered to be 40 cm. For information on how to carry out such construction work in other areas, you can learn from the experts.

Masonry foam blocks with their hands , and video help in reinforcing their

In the video How to laying of foam blocks with their hands explains the main advantages of this method.For those who have decided to start the process described and does not know how to put a clutch of foam blocks correctly, everything is told in detail.Therefore, in order to do everything correctly and accurately, we suggest you read the video mentioned above.

instagram viewer