Greenhouse own hands

How to build a greenhouse with their hands

Before proceeding to the greenhouse production of their own hands, think about the future construction of the form and decide what materials it should be.There are standard options greenhouses:

• lean-
• gable
• arched

Each option has pros and cons that are worth investigating in more detail.

Pent building is a great option for small or suburban infield, as these greenhouses are usually built adjacent to the wall of the house.Consequently, they occupy little space, and in addition, further heated by the heating of the building, which is adjacent to the wall.True minus all the same there - with pent roof in the winter you have to manually remove the accumulated snow.If you miss the moment and leave a rooftop snow, it may simply fail.

gable option is suitable for any site.It is the most popular type of greenhouses, as in this case, the greenhouse is obtained sufficiently high and spacious.

Arch greenhouses is also quite common.Thanks to the roof in the form of an arc with them freely rolled snow, so you never have to worry about the building in winter.Also the shape of the roof helps to dissipate sunlight that only benefit the crop.However, you remember that no matter what form was not a greenhouse, it is desirable to have a south-facing plot in a well lit place.

Materials for building a greenhouse with their hands, too, need to choose in advance.Generally, any shape for greenhouses use polycarbonate, glass or film.Having defined the shape and the materials for the greenhouse, proceed to the creation of a drawing of the structure of the future.

drawings greenhouses with their hands

Any construction requires careful calculations and thoughtful design, so if your goal - quality greenhouse your hands, consider and prepare a drawing of future construction.

choosing form the greenhouse, you can choose one of the ready-made drawings, or create your own project, which is a snap.The main element of any greenhouse frame is, it is and will need to be calculated.

Once the drawings are ready, materials purchased, the site for the future construction of cleared and leveled, you can start building.

Building a greenhouse with their hands

basic element for any greenhouse is a framework that should stand on a solid foundation.If you need a durable and reliable construction, the foundation is required if you need a simple portable greenhouse, you can do without it.Standard strip foundation is quite laborious and long-term work, so you can use a variant of the foundation of the treated impregnated larch timber, to which we will strengthen the construction of the frame.Bruce connected on the corners of the building corners or staples, and then built the foundation of the future is filled with earth.

frame greenhouses with their hands

frame greenhouse, depending on its shape, can be made of wood, aluminum, steel or plastic pipes.For a single or bi-greenhouses can be used wooden beams.

1. Before the construction of the frame purchased timber to be treated with linseed oil.
2. Next on the foundation set lower rail, which are attached to the uprights with a pitch of 60-70 cm.
3. Then make the upper rail, where the roof will be fixed later.For cantrail used a lighter timber than the bottom.
4. For additional rigidity cantrail overlaps transverse bars, so-called bongs.
5. exposed rafters, connecting Mezhuyev a ridge board (for a gable roof) on tightening.
6. In the end part of the greenhouse frame is set for the front door.

When the frame is ready, you can begin to trim greenhouse pre-prepared material.As a simple and cost-effective options are recommended or polycarbonate film.