Plasterboard partitions with their hands

Dividing a large room into parts for an accurate zoning easiest to perform with drywall.The material is easy to use, does not require special skills of the performer.Preparation and implementation take a minimum of time.A stylish finish allows you to create original interior plasterboard partitions for the practical division of space.

Preparing for installation

Contractor will need to pre-select the type of the separation wall.You can create as a single separator with a door and a partition that occupies only half of the room.The first option is suitable for creating separate spaces, the second will highlight the recreational area and the work area, or create one of the children's room two separate.Interesting photos of interior walls of plasterboard will help determine the most appropriate type and explore the popular style.

premises markings for the construction of installation is carried out on the walls, ceiling and floor.Using a level you need to draw a those areas where they will be located attachment.It is important to remember that you need to focus on these levels: walls, doors and windows can be positioned at a slight angle, which will result in uneven installation plasterboard partitions.

installation brackets and screwing plasterboard sheets

To get started, you must purchase dowels, profiles, screws and drywall itself.For ease of screwing sheets is recommended to use a screwdriver.He will perform the installation quickly and qualitatively.And to understand how to make interior walls with his own hands, will help the following statement:

1. According stamped with dowels fixed guide profiles.

2. Near the walls and then at a distance of approximately 50-60 cm exhibited rack profiles.

3. Mounting sheets starts from the wall.Screws should be placed at intervals of 15-20 cm. Hats should be recessed into a sheet and not act on it.

4. Joints sheets should fall into the midst of the support, so you can gently move the profile, if necessary.

5. The Last Leaf is usually necessary to prune, that he stood on the allocated site.Conduct pruning can be stationery with a sharp knife.Before you fasten drywall to the second hand, it is necessary to fill the space between the profiles mineral wool.

6. After completion of the screwing of the material on both sides of the structure is performed using grouting primer.

7. The resulting separator after drying grout can be painted, covered with decorative plaster, adhesive film or conventional wallpaper.

time of installation of interior walls of plasterboard will depend on the volume of work.The easiest and fastest made small design for zoning.But regardless of the size and characteristics of the separator, the cost will be insignificant.

Installation room divider with

door When creating a single wall with a door you need to modify the rack profiles, in which the box is mounted.In the midst of the support bar is inserted, providing sufficient rigidity and structural strength.Also inserted in addition profiles located above the passage and at the doorstep.

quality interior plasterboard partitions with a door should be carried out taking into account the resulting load separator.Set to create a passage must be easy door.Well I will approach for this product MDF.

Create a unique element will require a little time and minimal financial investment.In addition to the recommendations for the quality of work should be used and a detailed video about the installation of interior walls of plasterboard.The accuracy of execution and proper preparation can help build a safe and robust design capable of operating at a neat serve for many years.

Video partition installation of plasterboard with their hands