Build Daily

Electrics

August 12, 2017 18:06

Installation of electric heating for private homes

click fraud protection
Installation of electric heating for private homes

Currently, electric heating is a good alternative to ensure the house comfortable living conditions in the case where there is no possibility to use other sources of heat.

Despite the fact that the cost of electricity usage per month in this case will be a decent amount, yet the heat in the house, especially in winter is a fundamental factor.

Electric heating is virtually the only alternative for a holiday home, especially when it is visited year-round.

In this case, provide warmth in the interior space can be, if you install the heaters, or the same type of devices.

In any case, electric heating private homes involves a few different options.

You can choose to install and cost-effective solution with their hands corresponding to the boiler, and it is possible to approach the problem of solving the complex and at the same time to connect with each other a number of different devices.

To choose the right boiler and other equipment, be sure to need to carry out their own hands the corresponding calculation.

This will help you understand what equipment is better and more efficient in the work of its power indicators.

In addition, there are some energy-saving schemes, which give the possibility to use electric heating more efficiently.

Installation of electric floor heating

Contents:

  • Advantages and electric heating drawbacks
  • home heating options electricity
  • Water heating by electricity
  • Additional elements electric heating

Advantages and electric heating drawbacks

course, gasheating equipment in their parameters, including power, superior electrical, but is not always possible to establish precisely gas.

main and major drawback which has heating by electricity, the high cost of electricity per month.

It is not as economical as the gas, however, to create a comfortable temperature in the home mode.

Driving electric boiler heating

In addition, there is a certain energy-saving scheme, according to which it is possible to make all the necessary connections and lower, so the cost of electricity consumed per month.

In some individual cases, gas equipment can be replaced by solid fuel or diesel, however, power and many other indicators is electric heating is the most effective.

Installing such equipment is carried out with their hands fast enough, while at the preliminary stage, it is recommended to carry out the appropriate calculation of power and other indicators.

Virtually all devices that are used in electric heating system powered by a special electric heaters, and any calculation will show that their efficiency and power performance is much higher than that of any other device.

for connecting electric boiler type, you can use the network with different parameters, but it is better if it is a three-phase.

reduce the cost of electricity per month when using electric heating is possible by changing the boiler output and this energy-saving technology to date, installed in practically all the relevant devices.

Also noteworthy is the fact that electric heating systems involve the installation of such devices, which virtually no noise and does not emit any combustion products.

Installation, assembly, as well as a variety of connection as the boiler, and many other devices that are part of the system of electric heating the house can be made with your own hands.

Despite the many positive reviews about the electric heating cottage or country house, and a large number of advantages related equipment, there are still a number of shortcomings.

Very often it happens that the electrical network is simply not withstand the electrical connection of the boiler due to its high power.

Video:

is especially true for a country house, where there is no possibility to connect the boiler to a three-phase network.

Installation of the boiler will require major energy costs and that this point is one of the main drawbacks, which makes for many electric heating private houses simply impossible.

In any case, before you make a decision, you should carefully examine the wiring diagram and calculate the capacity of the necessary equipment.

In some cases, you can replace the boiler heaters, which consume less power, which is especially important for a country house.

Options heating electricity

house Today has developed various types of heating systems of private houses on electricity.

most simple and optimal scheme includes installation of convectors, which may well replace gas heating.

convectors, of course, will not be able to fully replace the boiler, but if properly calculate, on the basis of which it will be possible to choose the place of installation as well as the number and type, in the house, you can create a comfortable temperature.

To date used dry and liquid heaters, which together have some differences.

convectors dry type by its characteristics are devices that directly convert electrical energy into heat.

Currently numerous reviews attest to their high efficiency.

Video:

convectors have a compact size and attractive appearance, in addition, their installation can be easily done by hand.

Perhaps convectors - is the most versatile device that allows you to make an electric heating circuit in a short time.

In turn, the liquid type heaters are devices for electric heating which specially filled with water or antifreeze.

There are various types of these devices, and which one to choose the best, it is difficult to determine.

Liquid heaters are rolling performance, floor, and wall-mounted, which involves their installation.

Nearly all heaters have high rates of inertia, which means that the device quickly warm up the interior of the house.

Their installation does not take much time, and in addition, can be made with your own hands.It is worth noting that they do under the relevant electricity network is quite simple.

Before you decide on the number of devices and their power, it is recommended to calculate and choose the most suitable place where you can make installation of electrical heating of this type.

scheme of an electric heating for private homes and may involve the installation of portable devices, such as, for example, oil radiators, fan heaters and infrared heaters.

Of course, in this case the boiler is more preferred heating device, but not always it can be done and in some cases it is better to install portable devices.

Video:

In this case, the best solution would be - to establish a separate unit in each room, however it is recommended to calculate, on the basis of which to choose one or the other device.

oil heaters type are characterized by their high safety and efficiency, however, it is better to use them as an additional means of heating.

In turn, infrared devices requires a separate wiring diagrams as consume large amounts of power.

The best solution to equip a home heating electric type - is to install the boiler with water coolant.

This is indicated by the numerous reviews and, in addition, make sure that you can, if you look at the video, which is available below.

Water heating by electricity

Among all the existing types of electric heating, is considered the most qualitative installation of the boiler.

The main advantage with this is that the boiler will provide an opportunity not to carry out the connection of various heaters in each room individually, and therefore, increase and overall safety.

Video:

is now possible to buy electric heaters, the electrode, as well as induction heaters, each of which has both its advantages and disadvantages.

To make water heating in a house directly from an electric boiler, it is necessary to begin to calculate, and then decide on the place where it will be carried out installation of equipment, as well as to consider future pipework and place of Radiator locations.

It should be noted that if the premises are already distributing water, the problem is much simpler, as in this case will only include the boiler itself.

water heating systems directly from the electricity, of course, has its subtleties and nuances, however, subject to the rules and the technology can be installed by hand.

to start after the necessary calculations, it is necessary to choose the appropriate type of boiler will be held, which will be used to heat the working fluid in the system.

most important thing in this case - is to buy the right equipment, the power which is enough to heat the entire internal space of the house.

Next, you need to select a pipe, of which, respectively, and the system itself will be collected.

for private house the best - is to equip the system of closed type with forced circulation being in her working fluid.Thereafter

be carried out in each room installation of radiators, and for this purpose it is best to use the device, the body of which is made from either aluminum or steel.

In that case, if the boiler is installed in an existing system, it is imperative to make a forced type, which have additionally set the appropriate pump.

In some individual cases, calculation can show that for the normal functioning of the boiler is required installation of additional circulation pump.

You should also think about the device in the system electric heating various additional security sensors that help prevent all kinds of abnormal situations that can lead to failure of all equipment.

For more information about how to build a house on their own electric water heating type described in the video in this article.

Video:

Additional electric heating elements

As an additional source of heat in their homes in recent years have increasingly found heated floors, working on the electric power supply.

There are several different options for warm floor, but they all share that must be present heating element connected to the power supply.

Currently such floors can consist of special heating cable mat as well as thin film.Each of the floors has its own characteristics and nuances when connected.

In any case, before you will be made laying underfloor heating, performed the base insulation, in addition, provides them a secure connection and the ability to regulate the temperature in the process of exploitation.

When settling in the house electrical heating care must be taken that it is not only safe, but also the most economical.

In this case it is better to use those devices that have a high degree of efficiency.It is also necessary to take into account and other details, such as the size of the house, as well as power devices.

also recommended for this type of heating of the rating set electricity meter, which will help to save a little cash.

instagram viewer