Machines for plaster : types, manufacturers , price

What are machines for plaster?

Depending on the type of machine for plaster surfaces are divided into three main types:

1. Electric.The mechanism is driven by a motor.The most modern and effective members of the group can be called the station robot capable to perform most of the work without involving humans.Thus in this group have a fixed pattern (the overall, can be lifted by crane only) and mobile (small gear fitted for easy movement).

1. Pneumatics.The action is a compressor supplying air under high pressure to the spray gun and allows to quickly apply the solution on the wall.This group includes machines, pnevmokokshi and blowers for plaster.

1. Handmade.This is the most affordable and simplest model.In people, this machine is called "barrel organ" because in effect it is a turning of the handle on the body.

The good machine for plaster

labor automation always leads not only to improve its performance, but also to improve the quality of work by eliminating the human factor.Using the machine for plaster will open before you a number of advantages that are not available with manual finishing:

• machine creates perfectly smooth surface that can be manually repeat only professionals of the highest class;
• constant stirring of the solution in the device ensures complete homogeneity of the mixture and filtering of lumps, stones and other impurities;
• significantly reduced the time spent on a certain amount of work;
• no need for an additional alignment and polishing of plaster;
• adhesion between the plaster and the wall structure at higher engine performance due to the pressure in the sprayer, and it significantly increases the life of the wall covering;
• machine uses significantly less material to achieve the same results than working by hand, because there is no need to correct and align flaws;
• no need to hire more specialists to the plaster room (depending on the size of the work in the short term to cope 1-3 people).

worth noting that the machine for plaster is still not perfect, and before definitely choose it for their construction or repair, you should learn about its shortcomings:

• large size and weight even portable mobile devicesdo not allow to move them alone, it requires two to three people;
• power consumption of electrical machines sometimes goes beyond the standard 220, and then you need to connect another phase;
• accelerated pace of works execution is fixed because of the requirement to use a ready-made mortar each time only for one hour;
• due tangible noise in apartment buildings can be used for plastering machine only at the agreed with the neighbors and the time allowed by law;
• for washing larger models (plants) require up to 30 liters of water.

Where machines without plaster do not

device vain so popular among professional construction crews.Those works that are performed manually extended period of time, with plaster machine are carried out quickly and do not require adjustments.In addition, the scope of application of the device is fairly wide, which makes it almost universal helper.

By machine for plaster can be done:

• plaster, cement plaster;
• coats and fillings;
• painting;
• sprayed shtukaturki- for "coat";
• insulation;
• creation and application of reinforcing and adhesives;
• self-leveling floor;
• thin layer plaster;
• cement-concrete floor.

This is not a full list of works, which can be easily performed using the device.Use the machine in many similar, not cited above.

Price, models and manufacturers of the best machines for plaster

most affordable for the average buyer would be "hurdy-gurdy" (hand machine).Its scope is generally limited to small objects, often the device is used for decoration of the walls: "coat", "pitted", "Venetian plaster".

This solution kneading is performed manually, the amount is in the range of 2-4 liters, the device itself weighs about 5 kg, and can process per hour of 15 square meters surface.

unit price - 20 dollars.

Pseudo hopper (also known as "plaster shovel") to cope with the decoration of plastering and small objects and at the same time require the connection of an additional compressor.The machine consists of a metal container, which after some four nozzles supplied plaster, and in the other four is pushed out.

solution and kneaded by hand, the amount comes to 9.2 liters, and the device weighs only 2.8 kg.In the machine handles 30-60 hour-square meter surface.

Price pseudo hopper starts at $ 230.

Gun plaster versatile and easier to repair with respect to the previous types.It can be applied to the invoice processing, and start or finish plaster walls.Moreover, the set includes different-nozzle attachment which will help to adjust the desired length and the degree of jet nebulization.

solution Mixing also takes place by hand, the volume of the container up to 5 liters, and the weight of the entire device is equal to 2.5 kg.In the hour of the gun can be treated with 15 square meters of surface.

The price of such a machine for plaster comes to only 23 dollars.

Plaster stations provide a high level of comfort of use.Most of them work with both liquid and dry mixes, equipped with sharp blades for opening the bags with the components.Economical in terms of composition of plaster Flow - use it without the rest.Some models can perform well and putty.Accommodation in a single frame, fitting large wheels ensures ease of movement of the mechanism, even on large rocks and uneven ground.Work is accelerated in 3-4 times.It includes a set of tools and accessories for easy cleaning.

Manufacturers of plaster stations:

• PUTZKNECHT S82, Germany;
• PFT G5;
• PFT Ritmo Powercoat;
• «Giotto» Italy;
• BMS Master Plaster;
• LBM-150, Belarus;
• GRACO T-MAX

Price stations for automatic plastering work, depending on the volume set, functionality and price policy of the manufacturer may commence from 1800-8500 dollars.