How to paint on whitewash

Can I paint over whitewash

handsome, though not desirable, but it is possible.Only in cases where:

1. There is a very thin coat of whitewash;
2. It keeps well, it will not crack or crumble.

Otherwise, when painting it will be removed with a roller.And we end up with poorly painted and unsightly surface.

How to paint for the whitewashing

Before applying the paint surface is coated with a primer of deep penetration.Then, she is given time to dry completely.And then carry out the test on the appropriateness of staining, scratching the surface.If it can be easily removed and destruction, it is better not to risk it and do not stain it.In this case, can not do without a complete cleansing of the surface of the chalk.Well, if the primed surface has passed the test, then you can safely start coloring.

latex paint on whitewash

If the dye for coloring the surface chosen latex paint, you can do without a primer.This type of paint itself will act as a primer binding and securely fastened pieces of chalk.

If the layer of chalk or lime thin, tightly held and has blisters and cracks, then latex paint applied to it, will last for many years.

In some cases it is better not to paint the ceiling and walls for whitewashing

Strongly recommended to apply the paint on the chalk or lime, if:

1. There is a thick layer of whitewash cracked and swollen areas;
2. If you plan application of oil paint or enamel.

order not to risk and as a result do not get a bad result, it is better not to save time and effort, and immediately remove the layer of chalk or lime.Then the result will be much better and will last for many years.

How to apply paint on whitewash.Methods for the preparation of the ceiling or wall to spray paint

If you can not paint the ceiling or wall of the old coating, it is necessary to clean off.This can be done depending on the thickness and quality of the applied layer.

But in any case, the first thing you need to take care of all the furniture in the room.It needs to be closed with film and adhesive tape to avoid damage.

small layer can be removed using a fluffy cushion.It needs to be wet and clean the ceiling, vypolaskivaya periodically.It is also possible to use for this purpose a brush.

If the layer is thick, but not very well kept, it can be removed with a spatula, pre-soaking.Then all you need to putty the cracks and smooth the surface.And already then it can be sanded and primed, preparing to paint application.

And the last case: lime coated with a thin layer, which is well kept.Most often this happens if the solution were added for strength kley.Ee need to be removed using the sander.

required before applying the paint surface must be primed.You can use a special primer, varnish or wallpaper paste Selection should be made according to the paint that will be applied later.

After all the preparatory work on the ceiling and walls are completed, you can start coloring.Doing this can be a roller, wide brush or spray.Applying the latter should be applied three coats of paint, allowing each to dry.