Cupboards for shoes with his hands

Get rid of the clutter in the hallway of the shoe, shoe cabinet will help.Of course, you can buy a locker in the shop, but there you sell consumer goods of dubious quality at an inflated price.The exclusive piece of furniture, which will immediately rush to the guests in the eye is absolutely not difficult to make your own hands.

Decide to start with materials.Quite good tables can be obtained from a wooden board, laminated chipboard or MDF plates decorated façade.For good tables in the hall need a solid foundation, finished to your taste in harmony with the interior materials.Choose a suitable variant tables for shoes can be of many photos on the Internet.

To produce tables for shoes with his hands need a small set of tools, furniture accessories and materials.Depending on the free space in the hallway, you can choose vertical or horizontal pattern tables for shoes.The most simple bedside tables are made of metal.

Cupboards for shoes Metal

1. It is best to order in a workshop for the manufacture of metal window bars on your sketches component parts and assemble all the houses on the bolts.
2. side racks - byltsa better to make a rod or a square cross-section 6 - 8 mm, that will be enough for a beautiful appearance and bearing loads.You can order a twisted square and forged elements for elegant design tables.
3. shelves made of strips of metal rolling by 2 mm and a width of 50 mm.It is necessary to provide for the drawing attachment points that will make you advance and you drill them yourself.

Materials and tools for the manufacture of cabinets for shoes made of wood

Tools for the manufacture of cabinets for shoes

1. screwdriver and jigsaw.Screwdriver - 8 - 10 mm cartridge.Jigsaw you will need in case of rounding provided for in the design.You can do the usual fine teeth hacksaw on wood.
2. Set rasps and abrasive stripping flaws.
3. Sandpaper, PVA glue, pencils and dubbing plugs for SCREW.
4. Marking device -. Roulette, carpenter corner, pencil, etc.

materials for shoe cabinets in the hallway

1. quadrature materials, calculate quite easily.According to your plan - scheme, buy a board or laminated particle board.On the back wall only a small sheet of hardboard.
2. For legs, handles doors and drawer runners, it would be necessary to go to the shop of furniture accessories.Hands - a very important element of the decor.Beautiful handles on the door - radically transforming and changing for the better anytime most banal product.
3. Based on the project size, you will need a bar section 30x30 mm and the board or chipboard of at least 2 cm thick x.

Detailing stone hallway

1. For standard unit can take a laminated pressed plate of 20 mm thick lumber.It is possible to cut out the size of their own electric jigsaw or circular saw fine teeth.If you will be cutting small chips at the ends - do not worry, they are easily decorated with a face tape and furniture proofreader corresponding color.
2. For elementary tables, no frills approach exemplary pattern:

• 833H350 - marginalia on pedestals;
• 850H350 - on top of the board (table top);
• 818H100 - for coupling and ground brackets (4 pcs.);
• 813H360 - on the front facades.

Rear rear wall, cut from fiberboard or hardboard, and its size will be 830H845 mm.

These sizes are suitable for simple horizontal tables.

frame design tables

1. base frame, made of timber or steel angle, in the form box.Frame base sheathed with decorative facing plate.
2. back wall is made of MDF or tables along the contour of chipboard if provided paired with a bedside table mirror.
3. Kit board chipboard come with wooden planks are cut jigsaw or circular saw.Each plank is risochnaya thin pencil markings.
4. Mechanical parts that have been processed hacksaw tools, miter decorated with self-adhesive tape.There are a wide range of cross-cut strips of different colors, is well combined with laminated chipboard.

accessories Fastening on wooden lockers for shoes

1. Cross tie Boards have an important role in the safety and soundness of the carcass base.The bottom of the frame bases - is also from more durable and thick material.The decisive requirement is the stability of the tables to store shoes.
2. the corners of the bottom of the four drilled holes for legs.Feet is desirable to buy a furniture store accessories or make your own from thick and durable timber.
3. handles for doors and overhead decorative elements for beauty, attached to the front of an unusual and individual appearance.
4. curly elements pads can be purchased at the furniture store, and put them on the facade of using PVA glue and fix in upholstery nails.
5. much the same way attached decorative facades lining the front of the cabinets for shoes.
6. For removal of small chips, scratches, dents and other defects, there dubbing grout and furniture polish.Shpaklyuyut flawed place, overwritten, cosmetic pencil decorated and polished special furniture polish.