How to remove the top cover of the washing machine : Indesit , LG, Ariston , Samsung , Bosch, Whirlpool

No matter whether in your home washing machine Whirpool,LG, Ariston, Indesit and other brands, any equipment can break.And as in many cases to diagnose the cause of failure may be required to remove the cover system, every owner should know how to cope with this task.

most frequently detach the top cover of the washing machine Indesit, LG, Ariston, Samsung, the Whirlpool appears the first stage of repair of the product. For example, you will certainly have to remove the cover in case of breakage door.

That's what everyone should know the owner of the machine, intending to detach its top cover:

• Prior to any work equipment must be de-energized.
• To access the machine was complete, it must move away from the wall.
• to work you will need Phillips screwdriver.
• Actions will differ depending on the type of loading machine.

Pushing the machine to be able to unscrew the bolts behind the device, look for a place screws on the rear wall.Most models of the two self-tapping screws, but there are also machines with three screws.Using a screwdriver, turn the screws until full twisting.Remember that plastic washers may be under them, so make sure that such items have been lost.

Once you unscrew the cap, for its disconnection from the machine, you should make an effort, as a result of which the cover out of the grooves and moves a bit back first, and then up.Thereafter, the cover can be removed to the side.To install the cover, follow all the steps in reverse order, ie first push the cover into the slots, then tighten the screws.

First open the cover and, using a screwdriver, gently move the pins, making sure that they do not fall inside the machine.Two-four minutes the door lock must be disconnected.If these problems, you need to look for problems in the lock.To gain access to the castle, it is necessary to remove the side wall.Remove the screw locking device, click the tab, and then disconnect the wires.

Some machines, such as Ardo models, the lid should be removed a little differently. After loosening the screws behind the machine cover must not be shifted to the rear side and forward (to yourself if you stand face-to-hatch).In this case the lid will be offset by a certain angle, and that you have to be determined.

You can also meet and the option of fastening the top cover is not on the back and on the front wall. For example, such attachment occurs in older devices, Siemens and Bosch. remove the plug, unscrew the screws, then slightly lift the cover up and slide it into the front side with respect to the machine.As is the case with cars Ardo, you will need to find the angle at which the cover can be easily removed.