Decorative well in the country with their own hands

Suburban or rural house in the first place associated with the clean air, the beds and the well.Unfortunately, the latter problems may arise.Not all locations have the opportunity to create a drinking water source.In this situation, people have to pay attention to alternative ways to obtain water.This may be water, which is very rare in the villages or water transport service.In some cases, you can use the well, which is quite a distance from home.

Despite all this, many people still want to build your own well, though, and decorative.With the proper approach, you can build a really interesting object that will attract the attention of not only the owners of the house, but also passers-by.

is possible to create decorative conventional well, and in some cases pose classical structure as the basis for production of water from the well.In both cases, a well built site will decorate.

Of course, the process of creating a well - not the easiest, but in our case it is necessary to pay attention to it a decorative element.

main features decorative well

Unlikefrom conventional wells, which must comply with specific dimensions and parameters, decorative object might look as you like, as well as having the most imaginative design details.Of course, the only requirement - a look that has little in conformity with this the well.

decorative water source must match the appearance of the house and of the site itself.It is obvious that the well does not have to focus on the people's attention.It is not necessary to hide the object from the eyes of the people, since it is still a decorative element, designed to beautify the area.

I must say that you can create a decorative well for everyone in the present circumstances.It can be a wooden structure or stone.Of course, the second option is preferable, since it will have a longer lifespan than wood well.

Decorative well, with proper approach can be used as a kind of table.So, if the object will have a carport, you can spend some analogy with a small gazebo.In addition, a void inside the decorative wells can be used for various purposes.For example, it may be a small cellar for preserving a simple repository for old things.

desirable to plan everything so that during the construction of the well encountered no problems or even thoughts could affect the initial intentions.In any case, a decorative well is often used to decorate the landscape, so any time you can do it all.

Creating decorative wood well

course, wooden well - it's a classic.There are plenty of options with which you can create the most extraordinary well.In our case, the most important thing to create a decorative object, which would correspond to the landscape design.

In this case, we will look at the most common way to create decorative wood well.

First of all, we need a large barrel or the whole tank.Of course, the diameter of the vessel should be sufficient to create a real well in size.In this case, the need to dig a small pit (up to 1 m), which is immersed and tank (barrel).At the bottom of the pit will also need to create a small layer of sand.After placing the container in a recess need a little soil to fill the void.

On the sides of the container there must be free space.This is done in order to become the basis for a barrel of wood finishes.The base of the well needed to protect small logs.

Void, which is located around the barrel, you need to fill with concrete.It is a kind of foundation that will not only create a solid foundation, but also to facilitate further action related to the creation of decorative well.The depth of the concrete base should be about 30 cm. However, the foundation should be done only in cases where a decorative well will be used only as an ornament of the landscape.If the object will act as a sort of cellar, pour concrete can only be an outer ring around the barrel.Inside the tank, you can create an entire shelf as well as break the next well at any depth.However, you need to think in advance about how it will be deposited inside the container preservation, and how it can be removed from there.Rather, it is a great option in cases where the well will have a larger diameter (2-3 m).However, this would require a truly enormous capacity.

logs, which are located at the bottom, it should be fixed to the concrete base by means of anchors.Next, we need the board.Of course, they must have the same size and have a coating.If the well does not have a large canopy, raw lacquer board very quickly come into disrepair.

boards are arranged vertically and around the vessel.It is desirable to have a timber which is distinguished by the special slots.Otherwise, the interconnect board will be very difficult.It also makes sense to position the board so that the surrounding barrels formed a kind of square.Top need to create a border that will keep the wood finish.Fastening the curb can be made to the boards by means of small nails.From above, if necessary, it is possible that a small cap.If it is only a decorative well, then nothing like this do not need to create.It is enough to just buy iron handle and fix it to the top of the tree structure.If you need to cover, it is easy to knock her out of the boards.It is possible to create the door, which will have a curtain.It is necessary to approach this task with a hand raised to cover without any problems.

Then there are special racks, which can install a decorative drum, as well as to build the very roof of the well.Racks also better to make their tree.Considering that the well can be a heavy roof, pillar must have large dimensions, it is best to opt for bars of solid wood.

Racks can be mounted on the same surface, which is the well cover or they can be to dig right into the ground.In the second case it is necessary to consider that the beam will have to dig deep enough to provide sufficient stability of the construction.Also, if used as pillars of the board, you can just nail them with nails to the wood-based well.In this case, all directly dependent on the shape of the object as well as its size.

to create the drum need to have available a large log.It is desirable that it was really high quality processed.Handles for the wells can be easily found in many DIY stores.Beforehand it should be noted that as a handle regular fixture will not work.It is best to use a large enough pipe (diameter 3-5 cm), and high quality arched.

rack-drilled holes at the same level, so that you can fix the drum.This part of the structure can safely fix the nuts, since it may well be fixed.

The final step in creating a decorative well - is the construction of the roof.Most often, the owners make a choice in favor of a gable roof, as this is the easiest option.It should also be noted that the process itself - elementary.Just create a wood frame and top cover, for example, tiles.You can also create a small shelter, which will have a minimum slope.Often, as a roofing material that is chosen, which is framed roof of a private house.This will create a single registration area.

After the basic process of creating a well need to take care of the design durability.If the object is created on the basis of wood, you need to immediately cover the surface with protective compounds.This may be an antiseptic or conventional lacquer for wood.Paint the wood - not the best option, because the structure of the material gives the naturalness around the well.

Other options for a decorative well

the above probably the most difficult and time-consuming way to create a decorative well.It should be noted that the majority of people can not afford to spend the full amount of work, beginning with the creation of a wood base and ending with the erection of the roof.In this case, we consider the most simple and profitable in all understanding of the method of construction of a small decorative well.Running a little ahead, you can say that in the end the well should get no worse than in the previous case.

creating a foundation With the construction of the wood well the most difficult part of the process.To significantly beg problem, you first need to dig a small pit again.After that, we will need to purchase reinforced concrete ring, which is used to create full-wells.Thus, we need only one ring, which will form the basis for the well.Reinforced concrete structure for a couple of tens of centimeters sinking into the ground.After that you can either fill all the earth or concreted.The second option is more reliable and durable.

Ultimately concrete ring can simply be painted, or stylize the brickwork.With the proper approach, everything should work out very well.

There is also another way.In this case, the concrete ring will be used as the basis for a full brick.This will create a really sturdy well, which will decorate the entire site.Also, the metal sheets you can use to design well.Despite the fact that the landscape decoration is not the most ideal, the well will still look solid.

The metal pipe can be used as well racks.Of course, this option is not the best way to fit into the natural environment suburban area, but it is actually a simple and reliable solution.

create the well cover is optional.In most cases, the object looks attractive and without cover and the drum.Very often the free space inside the ring is used as a small flower bed.In this case, based small area at the site where the installation of the well cover.Here is the necessary amount of humus, then you can safely plant flowers or any other vegetable culture.

Similarly, you can create a flower bed around very well.A large variety of colors - it is always nice.

Decorative well and obtain water from wells

As already mentioned, you can only build wells in some areas.In other cases, the best option - it is a complete drilling of a well that will provide clean water the whole economy.

In this case the classical well structure can be used to produce water from the source.Of course, pump water buckets will not work, because for this purpose, a separate tap.

Thus, water from the well should fall into the tank, which is located directly in the soil.Next is the very decorative well.Emptiness inside a large cask (or concrete rings) will be used for the location of the necessary equipment.For the water from the tank needs electric.Accordingly, there is a need for electricity directly to the well.Above decorative covers any object is not required, and assembly is necessary to make a small door in the event of the need to have access to the pump.It should be concreted upper part of the object that does not leak into the rainwater.In order to get the water, just turn the faucet lever.

In this case, the water can be fed directly to the home, as well as in parallel in a decorative well.This is a great solution if suburban area has a large area.