Coffee table with his hands

coffee table - it's a little bit of luxury that can afford to almost everyone.In fact, without this object can be easily dispensed.But, it's nice to let yourself relax in the evening over a cup of drink and a leisurely conversation.In this case, everything should be on hand: cups and saucers, coffee pot and sugar bowl.Here and useful small coffee table, the price of which depends on the cost of consumables, the brand of the manufacturer and the labor costs paid professionals.

However, you can save considerably by making a tablewith his own hands.And thus it is possible to take into account all the personal needs and wishes: you can make a round coffee table, square or triangular.You can vary the width and height of the table top legs.All in your hands!

As for materials, the most popular coffee tables made of wood or glass.Although, it all depends on your imagination and taste: there are tables and plastic, and metal-based and using ceramics.However, the most frequent is the first two options.

most familiar to most people, the classic coffee tables made of wood.Wood - an environmentally friendly material, "warm" and practical, easy to a variety of decorative finishes.To create a simple wooden table coffee, do not have special skills, enough to have an idea about the basics of making furniture.Actually, the coffee table is not much different from an ordinary kitchen or dining room table.Probably the only dimensions.Worktop it is often much less than the surface of a large analogue.The height of the coffee table should be such that, sitting in a chair or ottoman, not straining, you could lend a hand for the cup.

How to make a coffee table made of wood

Tip!Cutting out parts blanks, planning to make coffee wooden table, consider the allowances for final processing.Along the length of this allowance should be about 2.5 cm in width - from 0.6 cm to 1.2 cm, thickness 0.15 cm Although today you can order the necessary parts required size only assembly in the carpentry workshop and carry home..

If you have experience in the manufacture of wooden furniture can make a coffee table with his own hands, following the step by step instructions below.Before that, should buy and prepare all necessary.

necessary materials and tools

1. For marking pencil and tape measure.
2. beam section 9h3,5 cm (12 m).
3. Glue for working with wood.
4. Saw and chisel.
5. clamps.
6. Sandpaper (large and small) or a sander.
7. Lac.

sequence works

1. Make a drawing (or at least an approximate picture plan) construction of the future application of the table with all the required dimensions.
2. Cut with a hacksaw from the timber part 70 cm (14 pieces) for the table top and the length of 35 cm (4 pieces) for the legs.
3. Take two pieces by 70 cm, and, departing from the edge on both sides of 5 cm, take a hacksaw and chisel grooves feet width of 9 cm and depth of 7 cm.
4. Lay of the countertop on a flat surface so that the bars with slots werethe second from the edge.
5. Rate engages density bars.If there are significant irregularities, flatten them with sandpaper.Check how the slots includes legs.These parts must be joined firmly but without too much effort.If necessary, modify the surface of the chisel or sandpaper.
6. Treat all adjacent side bars glue, clamp them together and pull clamps.At the same time follow the correct form of the tabletop.Items should not move relative to each other.
7. Allow the glue to dry completely.Then remove the clamp.
8. Sand the surface of sandpaper (first coarse, then fine) or a sander.
9. Apply glue to the ends of the legs and on the surface of the grooves.
10. Insert the legs into the slots and grind them after the complete drying of the adhesive.
11. Open the lacquer surface table three times, allowing each layer to dry.

Tip!Luck, for the first coat dilute solvent.So it penetrates deeper into the wood.

As you can see, this option is quite simple to perform.You might overpower a more complex plan.For those who do, and does, layman in this case, too, there is good news.In the manufacture of the coffee table, you can use non-standard materials or finished items.Below is an overview of these alternative models and creative ideas.

creative ideas for making coffee tables

table of finished boxes.Boxes connected to each other with screws or nails, sanded and stained to reveal or varnish.It is advisable to make such a table frame, base and attach casters for mobility.

table of wooden pallets.That really could not be easier.You can simply polish tray and open it with varnish.It is possible, for the sake of practicality, attach it to the wheels.You can paint in the color of the wallpaper, etc.

glass coffee table.Most commonly, a glass table top make itself and the base (ie, leg) can be from anything.The same pallet or crate stump, lacquering, metal or plastic tubes and so on. The table top is fastened to the base by means of a transparent glue, screws or special suction cup, calculated on the glass.

Creative imagination, look around, and maybe your idea will be no less creative!Be of good cheer!All you'll get!