Stretch ceiling in the kitchen photo editing features

Today, the suspended ceiling can be decorated in various ways.It adds sophistication to any room.The advantages of such a ceiling can be attributed to the practicality and reliability.In addition, it is quite resistant to fungi and harmful microorganisms.It does not accumulate in dirt and condensation does not appear for a long time.In addition, it is not subject to deformation when exposed to chemical components.The materials of which made the suspended ceiling in the kitchen, non-toxic and non-flammable.Holes and cracks appear on it is very rare.In addition, the ceilings do not absorb odors.However, they have a good sound and heat insulation.As for the warranty period for them, it is usually more than 12 years.Therefore, it is a very durable material.

How to choose a stretchthe ceiling in the kitchen

When choosing a design tension coating is required to be taken into account style cuisine, especially the interior and furniture placement.Like the classic version, you can give preference to white gloss finish.This option is well suited for the kitchen, decorated in a modern style or high-tech.To visually enlarge the space of the room, you can use a special mirror film.

Today, commercially available so-called luminous ceilings that even without individual lighting make it possible to lighten the room.This dim light gives the atmosphere of mystery.This ceiling consists of translucent surface of the canvas and mounted on the base through the lamp.If coverage seems insufficient to you, then it is possible to supplement the built-in spotlights.

A good choice would be a combined ceiling, in which the combined suspension and tensioning coating.With regard to multi-level ceiling value, it is essentially the same as the price of other coating materials.In addition, the need to install them is not very much time, as it seems at first glance.For this enough to make the holes and install the retaining profile.It should also be noted that the stretch ceiling film is environmentally friendly, as confirmed by the relevant quality certificates.

Types of suspended ceilings

Before we look at how to pull ceilings, get acquainted with their views.The material for this design using a glossy, satin, matte and textured films.

With glossy film ceiling can give reflection effect, which increases the visual space of the room.Because of satin material you can get a beautiful and bright surface, painted in any color.With matte film ceiling it seems to be perfectly flat.It is said that any of the above materials is sufficient moisture resistant and not susceptible to corrosion processes.For such ceiling is quite easy to care for.So, in order to remove dust and dirt, you can use any detergent.The main thing is that it includes alcohol and was not abrasive elements.

Existing ceilings on the materials used are divided into:

• textile,
• PVC.

The last option is the construction of vinyl fabrics, which are fixed using a profile made of plastic or aluminum.The width of the roll of finished film can reach 4.5-6 m. Generally, froze first surface is made, and then the data obtained a certain number of ordered manufacturing material.

consider in more detail the characteristics of each type of material for the stretch ceiling:

1. Almost any style kitchen interior, be it nouveau or Empire style, fit the glossy stretch ceiling in the kitchen.Today there is a large range of materials, different color and texture.
2. For small kitchens will be an excellent option ceilings with a smooth surface.They can visually expand the area.The disadvantage of these paintings is a noticeable seam.
3. Satin ceilings have similar properties as the matte and glossy fabrics.Thus, they also make the room visually wider.But it reflects much less detail than glossy.If you do
4. white matte stretch ceiling in the kitchen, then the surface will be similar to the ideal plastered.Although there are other shades of these paintings.In any case, the canvas matte glare will not be present, and hence the surface color not distorted.In addition, this ceiling is good that it is almost invisible seam.
5. If you want something original, you can make a ceiling in the form of a starry sky.The stars will twinkle on it by the projector and fiber yarns supplied to one side of the web.The color of stretch ceiling in the kitchen in this case, must match the hue of the sky, that is,it will be black or dark blue.
6. Textile ceilings usually look very good in the kitchen, decorated in a rustic country style.Such products are solid and seamless fabric of the web.They are made of polyester filaments which are impregnated with polyurethane.The width of the material is usually about 6 m. For the construction of the ceiling simply necessary to cut a piece from the roll value.
7. ceilings of PVC film good inhibit moisture.This surface does not lose its appearance, even if the neighbors will flood the top all of a sudden your apartment.Cloth under the weight of water, of course, slack, but the furniture and other decoration is here intact.The water must then be carefully drained from the surface.To avoid damage to the fabric for this job you can invite specialists.After draining the accumulated water ceiling usually acquires its original form.

In any case, you decide what material to install the ceiling in the kitchen.Each of them have both advantages and disadvantages.

Mounting tension ceiling: technology

If you plan to install a two-tier structure for the ceiling, you will need a special construction of the frame.

procedure of installation work at the same time will be the following:

1. Initially, measurements should be performed to determine the lowest point on the ceiling.From her notes level crates plasterboard.In this case, note that ceiling itself will be located below the structure erected.Therefore we need to step back from the top of the ceiling in terms of about 50-60 mm.
2. stretch ceiling height can be adjusted according to your kitchen size of the room.Using a simple building level, it is the mark in every corner of the room.Between all the markings must repel the molar cord line to which you will be guided during the installation frame.This is screwed on the perimeter UD profile.
3. next step is to clearly define in advance what form should eventually take the suspended ceiling.This is best done by drawing on the main ceiling of the corresponding figure.Next you need to identify the number of profiles and fasteners, which are required for the erection of the structure.
4. Once you have calculated the suspended ceiling and the number of materials required for the installation, proceed to the construction of the frame.On marked sketch on U-shaped hangers mounted plasterboard UD- or UV-profile.
5. side then the plane will need to set the profile every 50 mm trim.As a result, the material becomes much more flexible.
6. To acquired the necessary frame stiffness, between the inner and parietal profile installed jumper from the CD-pillars.
7. in any room, including the kitchen, should be adequate lighting.Therefore it is necessary to provide a place where it will be possible to do the wiring.It is usually located on the same level with plasterboard.
8. If you plan to install lighting on the ceiling, you will need to make cuttings of wires to the appropriate places.
9. wiring, which will be hidden under the plane laden with the ceiling, it should be packed in a corrugated sleeve and fix something to the main frame.In a remote area should be no joints and wiring connections.This place, for example, a space between the ground and the ceiling.Because of twists spark may occur, and if any fault you have to disassemble the entire ceiling.
10. Before hang suspended ceiling, it is necessary to sheathe plasterboard frame and putty surface.Sheet material thus fastened to the ceiling-mounted may be mounted on the base.Drywall is usually fixed with screws 27 mm in length.And between them should be a minimum distance of 310 mm.
11. available surplus in the figure later simply cut off using a hacksaw.It is important that the vertical strip was cut according to the size, and then every 50 mm on it incision paper layer.This is to ensure that the material can be bent.During the tightening of screws in drywall sheets their heads can break through the paper.To avoid this, there is a special attachment.It can be used during installation.
12. Before starting the installation of stretch ceiling, drywall constructions desirable carefully putty and sanding.Then, after installation you are ready without any modification.Furthermore, it is possible in advance to mount plasterboard sheets on point sources of light.

To install polyvinylchloride film on each wall of a room, especially, the profile of the attached plastic or metal.Then, the air temperature was increased to 45 degrees.The film is heated by Teplopushki to about 55 degrees.The web is then dressed in a baguette.Due to the increase, until it receives the necessary dimensions of temperature, the material is stretched, and when it cools, it will shrink and "locks into place".Thus, a beautiful and perfectly flat surface.

Luminaire

If you are wondering how to make a suspended ceiling, then, first of all, think about lighting.Most often, these designs are placed spotlights, but nobody forbids to use any lighting at will.Plan the placement of lighting fixtures.Wires for the installation of lighting should be diluted before the web tension.Posting necessarily packed in special corrugated hose (corrugated), and then attached to the main ceiling.

stretch ceiling in the kitchen Photo

Mounting tension ceiling: a video