How to paint garden furniture

Construction gardening area garden furniture is an important step in the design registration.The most popular materials for the interior are wood and chipboard.Although the functionality and comfort of such articles, in outdoor use they are exposed to ultraviolet light and rain.Therefore, it is important to protect the structure by staining.

Staining garden furniture made of wood

wood is the best option for the production of garden furniture.Natural, elegant and aesthetic material to create a real decoration of the houses adjoining area and render good service.However, in order to prevent possible fissuring, rotting and warping of products, you must adhere to careful maintenance.So, to know for sure how to paint wooden furniture , important to observe the following guidelines.

• Step 1 : Pre-treatment products.

Before starting work, disassemble the garden furniture on the details.At the same time, carefully check the status of each of the fastening element and replace corroded screws with new ones.

• Step 2 : Grinding works.

Using a grinder or coarse sandpaper, carefully polish the surface of wooden furniture products.Then remove the resulting dust with a dry cloth.

• Step 3 : Polishing and cleaning metal.

Before you paint the furniture, you need to eliminate all possible defects, contamination on metal structures.Use a wire brush that quickly removes stubborn paint and rust.

• Step 4 : impregnation Application.

If the product is made of wood a new and previously subjected to painting, it is necessary to thoroughly soak deep penetrating emulsion.This tool helps protect the surface from the effects of temperature, weather and mold.

Among the most well-known manufacturers of antiseptic primers can be distinguished brands such as:

• Alpina Holzgrund;
• HELIOS BORITEX;
• PINOTEX IMPRA;
• TIKKURILA SUPI;
• KOLORIT;
• SENEZH;
• Neomid.

Important!After application impregnation may be air bubbles.To remove them, you need to re-paint the surface of the primer, carefully clearing the place of formation of bubbles before the opening of the secondary.

Also keep in mind that dirt paint can change color when applied to the first layer, because it is deeply absorbed in a layer of wood.This helps to reliably protect the product from exposure to direct sunshine and moisture.

• Step 5 : Staining surface.

Before you begin the process and choose what color the paint furniture, should make sure that the surface of furniture products has dried enough and does not have contaminants.

Then carefully stir the paint and quickly apply a thin layer of content on a wooden product.It is recommended to carry out the work spray, but in his absence you can handle with a soft brush.

Among the manufacturers of colorful materials for wood such popular company:

• Tikkurila;
• Düfa;
• PINOTEX;
• Kolorit;
• Acqui;
• Tex;
• Zebra.

• Step 6 : Application of the second layer.

Before we cover the woodwork a second coat of paint, it must be sanded with sandpaper in the direction of the fibers.After you take off the dust with a dry cloth, coat the surface of the second visits.

Important! It is best to paint work in the summer, when the air temperature is 10-35 ° C.This will avoid unpleasant consequences in the form of absorption or nedosyhaniya paint on wood.

• Step 7 : staining metal parts.

To paint the furniture with his own hands is not just beautiful, but also practical and maintain the effect for a long time, should be treated and hardware components.Painting ADLER VariColor most suitable for this purpose because it has a high rate of protection against corrosion and material damage.

• Step 8 : Installation of colored products.

After the furniture item is completely dry, proceed to assemble it.It is advisable to use new fastening components.

painting wicker furniture

Garden rattan furniture has a distinct aesthetic appeal, so it is often used for interior decoration suburban area.Despite the convenience, low weight and a slim, rattan furniture is subject to delamination and deformation under the influence of the sun and moisture.Painting wicker furniture is easy due to the fact that the oily substance lie exactly, well absorbed and suitable for operation any unprofessional master.

The most common brand of paint manufacturer - is:

• Tikkurila;
• Düfa;
• MA-15;
• DOMUS;
• OTTO.

staining technology is no different complexity.To do this, use the following instructions:

1. Prepare the base surface: Clean from layers of old paint, remove stains and using sandpaper smooth out scratches.
2. Cover the base of the product or primer-impregnated wood.This will allow the paint will "grab" and hold out long enough.
3. Once dry, apply a thin layer of paint.At the same time, pay attention to all the details and indentations.
4. Wait until the product is completely dry wicker.Usually it takes up to 3 days.
5. With fine-grained sandpaper eliminate all the bumps, stains and flaws.
6. Cover the product with a thin layer of clear varnish.

Important! If you can not paint rattan furniture, you can use liquid wax.To do this, it needs to be applied to the cleaned surface and allow to dry.It will also protect the product from contamination, but not for long.

Staining furniture made of particleboard

One of the most common materials of manufacture of garden furniture today is a particleboard.This feed is compressed natural wood chips that are glued together by a layer of dense formaldehyde resin.However, under the influence of external, chipboard can be deformed and unstuck, so it is necessary to cover the paint material to protect it.In addition, garden furniture pictured design projects, made of extruded material, after painting becomes a decorative effect.

Features painting products from chipboard

Staining outdoor furniture made from extruded material allows to give products an unusual style, as well as to strengthen the moisture barrier properties and resistance to ultraviolet rays.After applying the paint to the competent chipboard furniture not only gets an updated look, but also increases the service life.In addition, the protective layer of paint materials reduces the harmful effects on human health in the operation of furniture.As the resin contained in the wood can not evaporate under the cover of varnish.

Pre-painting

For accurate and reliable staining of furniture made of particleboard need to carefully prepare the surface.This is the key to a successful outcome of the operation.And in order to remove the fragments of old paint, you can use the following methods:

• Heat - this method involves removal of inveterate paint by acting couple.For such a process will need building dryer, dry matter and a spatula, which can be removed from the surface of the softened paint layers.In order not to harm the particleboard follow the recommended temperature.
• Chemical - This option involves treating the surface by means of chemical composition.Special smyvku should be selected based on the type of old paint on the furniture object.And in order to avoid unpleasant consequences, it is important to strictly adhere to the prescribed instructions on the packaging.

Before you paint the furniture made of particleboard, it must be sanded and covered with putty to remove small defects.It is also recommended to cover the surface of the article a primer before applying the acrylic composition.This will create an additional barrier against the formation of fissures and cracks of.

Technology staining furniture

1. Clean the surface of the object furniture from dirt, grease and dust.
2. By sandpaper sand the furniture item, so that a small scratch - it will improve the adhesion of the material and the primer.
3. Apply primer emulsion is preferable to use acrylic tools.
4. After drying brush or roller, apply a coat of paint.To make the color saturation, the surface may be open multiple times.
5. When the paint is completely dry, polish the product again.
6. Apply a final layer of paint material.

Tips for staining chipboard

1. Products made from this material is processed before painting so that the adhesive composition is unable to evaporate the toxic substances and the surface does not absorb moisture.To do this, use the special impregnation, penetrating deep into the pressed sheet.
2. If you decide to apply varnish on the DSP, it is also desirable to open the top layer of a similar impregnation.
3. order to achieve absolute smoothness of the upper layer of the article, in use korotkovorsny coloring roller.
4. To emphasize the textural pattern of the material, the surface to be processed patinatsiey or alkyd paint.
5. If the painted furniture is dark, then you should cover it with two layers gruntovalnoy emulsion.Otherwise, it will shine through the shade of bright paint.

detailed information about the methods, woodwork painting tools and materials can be seen on a fragment: