Benzorezy metal

Benzorezy fire

Firing machine for cutting metal resembles acetylene generator, but has its differences.use atmospheric oxygen and gasoline to maintain high fire flow temperature.Both of these elements are pumped to the place of their entry through different hoses with a powerful pump and ignited.When cutting metal heating occurs, and then - its branch in the right place.

Firing Power cutters has advantages over the acetylene generator in terms of greater cheapness and availability of materials for the job.Oxygen is taken from the atmosphere, and gasoline can be purchased at any gas station.

Sometimes in not using gasoline, and kerosene.However, petrol saw has a better performance in their work.This is characterized by a higher temperature in the cutting core and creating a vapor at best.Such an apparatus is practical in the work and its use is possible at low temperatures down to - 20 degrees Celsius.

can also meet fire combi cutters.The core of the flame created by the ignition of gasoline and acetylene.Such Benzorezy has a combined structure with acetylene generators.They are used to save fuel.

Benzorezy disc

similar name with the firing unit Power cutters was due to gasoline engine inherent in the design.This unit has more power than tools such as Bulgarian, carvers, metal or end raspilivateli.This product may sawing materials such as stone, asphalt, iron, marble elements.One of the main advantages is the high depth of cut, which is 30-40 cm. These devices can be equipped with a water cooling system.

design of this unit consists of several elements:

• gasoline engine;
• cutting blade;
• handle;
• cooling system, depending on the design;
• sometimes included is a trolley for easy transportation.

Benzorezy without cooling systems are cheaper, but have a number of disadvantages that emerge in the process.They are:

• impossibility of long-term operation due to the rapid heating of the disk;
• large amount of the waste dust;
• rapid wear of the cutting blade.

Disc Benzorezy have separate models for specific purposes.They are:

• wall chaser.This device is made in a design that allows you to cut out recess depth required in the walls;
• relsorez.The product is equipped with a special holder, with which you can easily fix the device on the rail;
• model with a chrome cover to work in conditions of reduced visibility, as well as in the implementation of parsing the rubble rescue operations.

Features selection gasoline cutter

First, we should hold the device in your hands in order to appreciate the convenience of working with him.Benzorezy is heavy and dangerous work.For load balancing, you can use special belts.

When cutting materials with a disk Benzorezy, a large amount of dust.This is particularly evident when using a material such as concrete.Therefore, the motor unit must have a two-level filter to prevent blockages and breakdowns.It should also pay attention to the presence of protecting the operator from cutting gas emitted by the engine during operation.

Working with Benzorezy at the first operation

Before you start working with a new tool, it is necessary to carry out its run-in.Methods for this process can be found in the instruction manual.

First of all you should run the machine at idle.Before it is necessary to check the strength of the blade attachment.To this condition should be taken very seriously, because the disk failure can cause noticeable injury.

during cutting is better to keep Power cutters at right angles to the material work.Even slight deflection disc damage or failure may occur.

Check the air filter.After each use, it should be washed in soapy water, and dry to give.Gas filter needs to be replaced once a decade.

When setting the unit for long term storage should be clean all filters, drain the gasoline from the tank and place the instrument in a dry room.