Hanger wooden floor with their hands

Everyone knows the saying that "the theater begins with a hanger."It is said that not only in public places hanger regains an important role, but in apartments and houses.After all, the lack of this important subject the interior may cause confusion in the hallway.Today, commercially available many kinds of hangers of various shapes and designs, but it is quite easy to do and in-house from scrap materials.To learn how to do it - will tell on.

Choice designproduct

to manufacture clothes hangers are commonly used timber.But not everyone is suitable for this material.It is necessary to choose the most solid and the dried wood.If the material is not properly dried, then after a while it may lose its shape.Of all the timber for a hanger is recommended to give preference to a pine tree.This material is good because it is easy to process and at the same time has a low weight.If you choose to use solid oak, it should be noted that it is difficult to process and harder.Parts of the timber racks are usually joined together by means of adhesive.To it similar to some important requirements imposed.Incidentally, if the adhesive unseasoned timber may lose its adhesion, because moisture release material.

very important role played by the choice of form hangers.It should be borne in mind that for the interior of the object must be at least three legs, the length of which depends on the height of the product.Thus, it turns out that the higher the rack, the more massive and more she must have support.Often, this product is designed not only for clothes, but for pantsuits to one place to store all your clothes.For this purpose, the width of the hanger is usually made longer than normal.Thus, there will be able to fit a lot of different clothes.

When the model you have decided on a hanger, it is necessary to draw a diagram that specifies the exact dimensions of the future product.And it is desirable to describe the size of even the smallest detail.This can be very useful in the course of manufacture.When the circuit is ready, you can begin the installation of wooden hangers for outdoor clothing.

Hanger floor with their hands

for manufacturing products needed:

• saw,
• knife,
• drill,
• sandpaper,
• chisel.

Materials Needed:

• boards of desired size,
• board,
• glue for wood,
• screws,
• stain for processing products,
• varnish.

When it's all there, you can start to work.It's wise to determine the shade of the future product.In general, light wood can be painted in virtually any color.It is sufficient to apply the stain until hangers surface is not the desired hue.When covering the stain or varnish should be put under the product any substrate.Otherwise droplets may accidentally get on the floor.Luck should be used only after the complete drying of the stain.Generally, with the varnish due to the strong smell it is best to work in a room that is well ventilated or, more generally, in the open air.After opening the varnish product should be wiped with a cloth dampened in a weak solution of vinegar.

consider in more detail the procedure for execution of works:

1. First you need to prepare the wood.In particular, the tree trunk is purified from the bark of twigs and rough.Cora in any case should not be left as it would be desirable to give the product a more natural look.After all, if it is left, it will gradually crumble, thereby creating an additional reason for cleaning the premises.In addition, the bark is often the habitat of small insects.
2. bark can be removed with an ax or a knife.This is followed by a walk a few times on the rough wood first and then fine sandpaper.The surface in the end should be smooth, at least to bitch for not clinging clothes.
3. After that you should make the base product.It is said that all elements of the hanger (legs and stand) it is desirable to make one.Start with the spider is not necessary.Otherwise, if it is then attach itself hanger, the design can become loose over time.You must adhere to the following rules - the bottom edge of the stand should be performed on the same plane with the bottom of the legs.
4. You can then go to the measurement of the diameter of the trunk.The removed dimensions will need to select the appropriate width of the bar.If the bar is wider than necessary, it is possible hacksaw to saw it along to the desired size.
5. Usually hangers height is about 1.7 m. For products that height should have a cross departures about 30-32 cm. So will need a couple of bars of length 65 cm. They must be cut in half, to get four workpiece length of about 30-32see
6. hardest part -. stem is attached to a circular bore.If simply attach the bars, the structure will unstable, and after the first falling down likely collapse at all.Correct to put a tripod on the floor and put to him the legs of the workpiece.To connect them, you will need to make a triangular wooden inserts.Then they are attached to the bars with screws.
7. To strengthen the product at fixing triangular elements to the legs and trunk need to drill a hole diameter of a few millimeters smaller than the diameter of fasteners.His further will need to pour glue.Only then can you screw the screws.Sometimes holes for stabilizing structure than glue, and more bits are filled rubber.
8. To give the finished rack functionality should be added to it hooks for coats.They can be made at some distance from the trunk.There must comply with one important rule.To design did not fall, the center of gravity hanging on the rack of clothes should not be beyond the cross.
9. Hooks can be used as a self-made, and decorative.In any case they can not be attached directly to a tripod, because the floor hanger for clothes wear out quickly and will become worthless.You can do this: take the sticks and cut them out of the square with the side a bit more than the diameter of the trunk.Initially, the hooks are attached to the square of the tree, and then to the items themselves.Thus, they will be secured, and thus will not be in contact with the "body" of a product that because of this arrangement, it will last longer.This is particularly useful for dressing hangers, are used quite frequently.

you can decide which to use hooks - fine or homemade.However, if you make them yourself from the wire, they will have is not very attractive.Therefore, it is better to give preference to decorative hooks, purchased in the store.They are attached to the tree is usually a couple of screws.If you have the necessary skills, you can with a chisel cut the holes square shape, which should then be "hidden" hooks.It will look better than simply pushed onto the screws.When the hooks are in place, a square wooden box must be connected to the upper part of the product by means of several screws.

As for the hanger, then it can be painted with paint or varnish.Hue choose to your taste, but it is better to choose the style of finishing the interior, where there will be a wooden hanger floor hallway.A layer of paint or varnish is applied to at least two times.

basis for hangers wooden floor must be sufficiently serious and stable.As it is possible to adjust the bottom of the lamp, the skeleton of a floor fan or buy a stand for a Christmas tree.

Suit hangers wooden floor

above-described rack is not suitable for men's suits.Therefore, they make the product slightly different design.As the base material used is similar timber.To build such a hanger, you must first measure and cut the blank, according to the specified size.They are then carefully processed and fine tuning.Then in the right places made mounting holes.

Further, according to the scheme going to the product itself and runs its finishing.Will stick to the bottom or pieces of rubber wheels.Few details on assembling a hanger: first, vertical racks are bolted to the base using the 4 large screws.Then inserted and screwed strap using a small screw between the supports.Further, the hole uprights inserted holder for trousers.To securely fix it, handy mallet.After that, construction is screwed to the uprights by means of four screws.Then bolted hangers.Hanger for Suit is ready for use.

How to make a wall hanger

basis of this hanger is a shield on which is placed hooks.It can be made as a solid or slatted.For the latter need less material, and moreover, it is easier.For such a shield assembly take a couple of bars in parallel and connected to each other by means of dowels.Thereafter nailed thereto about vertical strips 8 cm wide and have hooks are attached to the boards.

dimensions such hangers may be different and depend mainly on the dimensions of the walls and around the premises.You may wish to arrange it nicely: varnish, paint or paste over self-adhesive film.In any case, do not forget how to treat the ends and edges to avoid remaining roughness.If you wish, you can at the top of the hanger to do with metal parts of the shelf in the form of a board width of about 25 cm, which will be stored caps.If the hanger is made full height of the wall, the bottom usually equips shelf shoe.To be safe, it is desirable to set the bottom bars measuring 5 × 5, which will support the shelf.

floor Wooden Hangers: photo