How to collect the electrical shield

problem of collection and the installation of electrical panel appears, as a rule, in cases where the last stage of private construction work before the procedure becomes electrifying object.Implementation of wiring - not difficult, but dangerous and responsible process, and his last point is just setting panel.As will be discussed further on, how to assemble electrical panel , and the material will be built in the form of the installation instructions.

Assembly instructions panel

So, proceed to the construction of the shield in the eventwhen the bulk of the processing and wiring work is completed on the premises.The first thing the installer will face this choice - which will serve as a shield.Either it will be bought ready-made or will be collected on their own.In the second case, the materials must be purchased for the assembly panel in a specialized shop, ie body and strips, which are mounted on the switches, and of course the switches themselves.

should be borne in mind that there are two types of boards - an obsolete type, where the so-called fuses or plugs can be unscrewed, and - a modern type.Of course, it is strongly recommended not to go to the older version, as the new surpasses it in all aspects of quality and safety.Modern devices, regulating the supply of electricity are called packet switches or "batchfile".The amount of data in the switch panel must exactly match the input amount to the shield electrical circuits.This is the main aspect in understanding how to build an electric shield.On the left is attached a central, main circuit breaker, acting directly on all circuits.It has a different color.

recommended to add a guard in addition to the basic 2-3 batchfile spare, because the possibility of more in the home network is very high.It should be clearly aware that devices having a capacity of more than 5 kW must have its own fuse.For example - water-heating boilers.Turns off automatically fuses modern and have included manually by analogy with the automatic stopper.The only drawback batchfile - can not be mended.

So batchfile mounted on a special bracket - everything seems simple, but do not forget a very important point - Set the ground plate.Buy it can also be in any specialty store.Setting it takes place after the installation of the entire series of the required number of batchfile.It is from this plate will depart the ground wire to the grounding means.Scheme earthing should be developed prior to the panel installation.

requires a special casing, which will set a guard, usually hollowed rectangular hole depth calculated at face level.After installing the panel connection cables into the housing starts.It should be a clear understanding of electrical current circuits, and this job best left to a qualified electrician.And, as practice suggests, a detailed analysis of how to build an electric single-phase or three-phase plate, it is best to look at the video, which is available on this page.

scheme switch box

We suggest you familiarize yourself with the different circuits of the electric panel.

Video switch box assembly