Warming balconies with their hands

Practically each owner faced with the need to warming their balconies inside : for a small apartment - is, first and foremost, an additional precious square footage, and for a large - need to keep warm and, if possible,extension of usable space, which is never superfluous.

Many construction crews engaged in insulation of balconies and loggias, but ordinary host can do it in their own way to meet the requirementsand technology.This will require four components:

• loggia;
• desire;
• tools;
• materials.

Stages insulation

offer step by step instructions warming loggia with photographs, by which any man with basic application skills with tools, will be able to "dress" their extra square footage:

1. First we need to decide on the materials.There are 2 options: insulation loggia Penoplex or foam.More needs moisture resistant drywall or any other material that is resistant to moisture for the final finish.It is also necessary to dry the mixture to fill the floor, foil film, "summer" foam, wooden beams, metal tape, plastic dowels, screws and polyurethane adhesive.The advantages of each of the materials and the calculation of their number - a separate issue.

2. To fasten the ceiling slab insulation with plastic dowels with a wide hat.Consider the scenario where the window frames have been installed, and in the absence thereof, the gap must be sealed with foam.Likewise sutured balconies and side walls.The joints in the corners are processing the "summer" with foam without toluene, which dissolves polystyrene foam.The joints between the slabs on the front surface sizing tape.

3. screed made of expanded clay or ordinary cement-sand mixture on the floor.Once hardened, the plates are stacked such that the walls.Some masters recommend the work to begin with the preparation of the floor, leaving between the screed and the wall temperature gap in which the foam insert them later from the wall.However, we recommend a different sequence of warming of the loggia, since the gap left may get less than what is required.

4. On the plate already attached by sewn foil film that will serve as a steam insulating and thermo-layer simultaneously.It is secured by a polyurethane adhesive.And her joints, in turn, are sealed metal tape.All the same is done on the floor.As a result, we have to be in this kind of "Thermos".

5. The last step before the final trim plastic panels, paneling or drywall to painting (pasting wallpaper) - a patch of wooden beams.Sheathing is performed using conventional screws and dowels.

6. Before you sew up the final wall material, it is necessary to lay the wiring layout with the alleged supply points.Further sutured walls, the floor is laid laminate.If tiling is planned, this is done in the reverse order: the floor, and then the wall.

As you can see in the photo, insulation balconies with their hands - is simple enough, sometimes instructive, and most importantly - the whole family will appreciate the result.

Videos insulation balconies with their hands