Insulation of walls inside the apartment

own home protection from the cold and can be carried out from the inside and from the outside.The first type is recommended immediately after buying an apartment.This will allow to avoid problems with the operation of buildings.Proper insulation of walls inside the apartment is carried out on a fairly simple scheme, but has a certain characteristics.Perform quality work can any owner.It starts with the execution of the profile frame mounting.

Framework preparation

-quality thermal insulation of walls inside the apartment is mademineral wool.This material is harmless, environmentally friendly and fire resistant.Being it is under two layers of drywall.To fix the sheets need to frame assembly.

initial task -. Delineation of the perimeter profile design with minimal offset from the embossed projections in any section of the wall at least 1 cm

mounted along the perimeter of the guide profile.After every 40 cm on the floor and the ceiling are made identical to the mark under the bar.And with a gap of about 70 cm on the display mounted profile, starting from the floor, held the mark, the horizontal upper and lower guide profile.

She will be attached hangers.They will allow for the correct alignment of the frame: after the insulation wall in the apartment you need to achieve perfect evenness drywall surface for its simple finish.Suspensions are installed on the mark held securely fastened to the wall under the stands.For more detail photos to help sort out the ongoing work.

frame alignment under the drywall

From frame error will depend on the type of wall in the room.Therefore, the executor must follow such instructions to complete the frame alignment:

1. over the uprights to stretch the thread along the horizontal marks.
2. Push rack profiles, so they do not touch the threads of level.
3. first rack individually align under the thread, fixing it with three hangers.
4. Repeat operation for other racks.
5. Rate job, make sure all the fastening elements.
6. Delete tiered yarn.

Laying insulation

With minimal an internal wall insulation apartments and additional sound insulation can be, using mineral wool.

It is installed under the frame overlap.But we must take into account the required thickness of the material that will adequately protect the room from the cold and noise.

The final stage will be the installation of thermal insulation of the walls of two layers of drywall.The first layer is placed horizontally: the joint between the sheets must be placed in the bottom of the wall.Each new sheet should have a smaller width to The result is a kind of ladder.The attached video allows you to see the process of consolidation and the correct location of the jumpers for the second layer.

Facial number of sheets is positioned vertically.Drywall should be installed so as to avoid cross-shaped joint between the two layers.High-quality thermal insulation of the walls with their hands on this technology will help maximize teplosohrannosti in the room and to avoid damage to the sheets at their attachment to the profile at the weakest point: the junction of the factory edges.

Present insulating walls inside the scheme in compliance with instructions and tips will ensure a good thermal insulation and sound insulation of the room.Engage can even landlord who does not have the practice of repair facilities.With careful preparation works will take about 1-2 days.

Video insulating walls inside the apartment